Bluetooth

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Related articles

Bluetooth is a standard for the short-range wireless interconnection of cellular phones, computers, and other electronic devices. In Linux, the canonical implementation of the Bluetooth protocol stack is BlueZ.

Installation

  1. Install the bluez package, providing the Bluetooth protocol stack.
  2. Install the bluez-utils package, providing the bluetoothctl utility. Alternatively install bluez-utils-compatAUR to additionally have the deprecated BlueZ tools.
  3. The generic Bluetooth driver is the btusb kernel module. Check whether that module is loaded. If it's not, then load the module.
  4. Start/enable bluetooth.service.
Note:
  • By default the Bluetooth daemon will only give out bnep0 devices to users that are a member of the lp group. Make sure to add your user to that group if you intend to connect to a Bluetooth tether. You can change the group that is required in the file /usr/share/dbus-1/system.d/bluetooth.conf.
  • Some Bluetooth adapters are bundled with a Wi-Fi card (e.g. Intel Centrino). These require that the Wi-Fi card is firstly enabled (typically a keyboard shortcut on a laptop) in order to make the Bluetooth adapter visible to the kernel.
  • Some Bluetooth cards (e.g. Broadcom) conflict with the network adapter. Thus, you need to make sure that your Bluetooth device gets connected before the network service boot.
  • Some tools such as hcitool and hciconfig have been deprecated upstream, and are no longer included in bluez-utils. Since these tools will no longer be updated, it is recommended that scripts be updated to avoid using them. If you still desire to use them, install bluez-utils-compatAUR. See FS#53110 and the Bluez mailing list for more information.

Front-ends

Console

  • bluetoothctl — Pairing a device from the shell is one of the simplest and most reliable options.
http://www.bluez.org/ || bluez-utils
Tip: To automate bluetoothctl commands, use echo -e "command1\ncommand2\n" | bluetoothctl or bluetoothctl -- command.

Graphical

The following packages allow for a graphical interface to customize Bluetooth.

  • GNOME Bluetooth — GNOME's Bluetooth tool.
    • gnome-bluetooth provides the back-end
    • gnome-shell provides the status monitor applet
    • gnome-control-center provides the configuration front-end GUI that can be accessed by typing Bluetooth on the Activities overview, or with the gnome-control-center bluetooth command.
    • You can also launch the bluetooth-sendto command directly to send files to a remote device.
    • nautilus-bluetoothAUR adds a "Send via Bluetooth" entry to Nautilus' right-click menu
    • To receive files, open the Bluetooth settings panel; you can only receive whilst the Bluetooth panel is open.
    • To add a Bluetooth entry to the Send To menu in Thunar's file properties menu, see instructions here. (The command that needs to be configured is bluetooth-sendto %F).
https://wiki.gnome.org/Projects/GnomeBluetooth ||
  • Bluedevil — KDE's Bluetooth tool. If there is no Bluetooth icon visible in Dolphin and in the system tray, enable it in the system tray options or add a widget. You can configure Bluedevil and detect Bluetooth devices by clicking the icon. An interface is also available from the KDE System Settings.
https://invent.kde.org/plasma/bluedevil || bluedevil
  • Blueberry — Linux Mint's spin-off of GNOME Bluetooth, which works in all desktop environments. Blueberry does not support receiving files through Obex Object Push.
https://github.com/linuxmint/blueberry || blueberry
  • Blueman — A full featured Bluetooth manager.
https://github.com/blueman-project/blueman || blueman
  • ObexFTP — A tool for transferring files to/from any OBEX enabled device.
http://dev.zuckschwerdt.org/openobex/wiki/ObexFtp || obexftpAUR

Pairing

Note: Before using the Bluetooth device, make sure that it is not blocked by rfkill.

This section describes directly configuring bluez5 via the bluetoothctl CLI, which might not be necessary if you are using an alternative front-end tool (such as GNOME Bluetooth).

The exact procedure depends on the devices involved and their input functionality. What follows is a general outline of pairing a device using bluetoothctl.

Start the bluetoothctl interactive command. Input help to get a list of available commands.

  1. (optional) Select a default controller with select MAC_address.
  2. Enter power on to turn the power to the controller on. It is off by default and will turn off again each reboot, see #Auto power-on after boot.
  3. Enter devices to get the MAC Address of the device with which to pair.
  4. Enter device discovery mode with scan on command if device is not yet on the list.
  5. Turn the agent on with agent on or choose a specific agent: if you press tab twice after agent you should see a list of available agents. A bluetooth agent is what manages the Bluetooth 'pairing code'. It can either respond to a 'pairing code' coming in, or can send one out. The default-agent should be appropriate in most cases.[1]
  6. Enter pair MAC_address to do the pairing (tab completion works).
  7. If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter trust MAC_address to do so.
  8. Enter connect MAC_address to establish a connection.

An example session may look this way: 

# bluetoothctl
[NEW] Controller 00:10:20:30:40:50 pi [default]

[bluetooth]# agent KeyboardOnly
Agent registered

[bluetooth]# default-agent
Default agent request successful

[bluetooth]# power on
Changing power on succeeded
[CHG] Controller 00:10:20:30:40:50 Powered: yes

[bluetooth]# scan on
Discovery started
[CHG] Controller 00:10:20:30:40:50 Discovering: yes
[NEW] Device 00:12:34:56:78:90 myLino
[CHG] Device 00:12:34:56:78:90 LegacyPairing: yes

[bluetooth]# pair 00:12:34:56:78:90
Attempting to pair with 00:12:34:56:78:90
[CHG] Device 00:12:34:56:78:90 Connected: yes
[CHG] Device 00:12:34:56:78:90 Connected: no
[CHG] Device 00:12:34:56:78:90 Connected: yes
Request PIN code
[agent] Enter PIN code: 1234
[CHG] Device 00:12:34:56:78:90 Paired: yes
Pairing successful
[CHG] Device 00:12:34:56:78:90 Connected: no

[bluetooth]# connect 00:12:34:56:78:90
Attempting to connect to 00:12:34:56:78:90
[CHG] Device 00:12:34:56:78:90 Connected: yes
Connection successful

Dual boot pairing

To pair devices on dual boot setups you need to change the pairing keys manually on your Linux install, so that they match in both systems.

Setup

To do this, first pair your device on your Arch Linux install. Then reboot into the other OS and pair the device. Now you need to extract the pairing keys, but first switch off the Bluetooth devices to prevent any connection attempts.

For Windows

Extracting on Windows

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: The key structure for a BT5.1 mouse may be different than described here. (Discuss in Talk:Bluetooth)

The registry key containing the link keys may only be accessed by the SYSTEM account, which cannot be logged into. Therefore, you will need Microsoft's PsExec tool from the official Windows Sysinternals site in order to run regedit.exe as SYSTEM.

Download PsTools, and extract PsExe64.exe.

In an administrator instance of a command shell, from the location of the extracted EXE, launch the registry editor: 

.\PsExec64.exe -s -i regedit.exe

In the registry editor, navigate to the following registry key: 

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BTHPORT\Parameters\Keys

Within this key is a key for each Bluetooth adapter, by MAC address. If there are multiple keys, and you are unsure of which to use, follow this guide to find the MAC address for the desired Bluetooth adapter.

Within the desired device adapter key, there is a binary value for each paired device, by MAC address in the same way.

For each paired device that you wish to share between the installations, right click on the whole key and export it as a .reg file.

If there are LTK, ERand, and EDIV values present, this is a Bluetooth 5.1 device, and these too must be saved.

Extracting on Linux
Note: If your Windows partition is encrypted with Bitlocker, you will not be able to access it from Linux using chntpw.

Reboot into Arch. Install chntpw. Mount your windows system drive. 

$ cd /path/to/windows/system/Windows/System32/config
$ chntpw -e SYSTEM

Inside the chntpw environment, run 

> cd CurrentControlSet\Services\BTHPORT\Parameters\Keys

Then get your Bluetooth adapter's MAC address and enter its folder 

> ls
> cd your-device's-mac-address

Do the same for your paired devices: 

> ls
Node has 0 subkeys and 1 values
size  type        value name    [value if type DWORD]
16    REG_BINARY <123456789876>

Now get your device's key through hex: 

> hex 123456789876
:00000 XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX (some other chars)

The "XX"s are the pairing key. Make note of which keys map to which MAC addresses.

In a BT5.1 Mouse, you might see this output: 

Node has 0 subkeys and 8 values
  size     type              value name             [value if type DWORD]
    16  3 REG_BINARY         <LTK>
     4  4 REG_DWORD          <KeyLength>               16 [0x10]
     8  b REG_QWORD          <ERand>
     4  4 REG_DWORD          <EDIV>                 37520 [0x9290]
    16  3 REG_BINARY         <IRK>
     8  b REG_QWORD          <Address>
     4  4 REG_DWORD          <AddressType>              1 [0x1]
     4  4 REG_DWORD          <AuthReq>                 45 [0x2d]

Of these values, you must save LTK, ERand, and EDIV.

Preparing Bluetooth 5.1 Keys

If there were LTK, ERand, and EDIV values in the registry for the desired device, they must be converted for use with Linux. LTK corrsponds to LongTermKey.Key, ERand to Rand, EDIV to EDiv. The ERand value shound be reversed and converted to decimal. For example:

  • An LTK of 48 4D AF CD 0F 92 22 88 0A 52 9A F4 76 DA 8B 94 makes for a LongTermKey.Key of 484DAFCD0F9222880A529AF476DA8B94.
  • An ERand of 63 02 84 B8 5D 40 44 DF makes for a Rand of 16088054540146049635.
  • An EDIV of 37520 makes for an EDiv of 37520.
Note: You can use this Python code to do the ERand conversion: 
>>> ERand=' 63 02 84 B8 5D 40 44 DF   '
>>> ERand=list(reversed(ERand.strip().split()))
>>> int("".join(ERand), 16)
16088054540146049635

For macOS

Boot into macOS, then open a terminal.

  • If you are on Sierra or older, run
$ sudo defaults read /private/var/root/Library/Preferences/blued.plist LinkKeys > ~/bt_keys.txt
  • If you are on High Sierra or newer, run
$ sudo defaults read /private/var/root/Library/Preferences/com.apple.bluetoothd.plist LinkKeys > ~/bt_keys.txt

For older versions of macOS (High Sierra and older) you will have to reverse the keys. For example, 98 54 2f aa bb cc dd ee ff gg hh ii jj kk ll mm becomes MM LL KK JJ GG FF EE DD CC BB AA 2F 54 98.

Copy the bt_keys.txt file to a drive that can be read from Arch Linux. Reboot into Arch Linux.

Finishing up

Now that you have the keys change user to root, then continue with: 

# cd /var/lib/bluetooth/BT-Adapter-MAC-address

Here you will find folders for each paired Bluetooth device. For each device you want to pair with Arch and your dual boot, do the following: 

# cd device-MAC-address

Edit the info file and change the key under [LinkKey]. E.g.: 

info
[LinkKey]
Key=XXXXXXXXXXXXXXX
Note: You will have to make sure that all the letters are in capital case. Remove any spaces.

Then restart bluetooth.service and pulseaudio (with pulseaudio -k && pulseaudio --start).

You should be able to connect to your device now.

Note: Depending on your Bluetooth manager, you may need to perform a full reboot in order to reconnect to the device.

Configuration

Auto power-on after boot/resume

By default, the Bluetooth adapter does not power on after a reboot or resuming from suspend. If you would like the adapter to be powered on after reboot or resume, set AutoEnable=true in /etc/bluetooth/main.conf in the [Policy] section: 

/etc/bluetooth/main.conf
[Policy]
AutoEnable=true

Discoverable on startup

If the device should always be visible and directly connectable: 

/etc/bluetooth/main.conf
[General]
DiscoverableTimeout = 0

Wake from suspend

To allow bluetooth keyboards, mice, etc. to wake the system from suspend. First, check the bios settings and make sure that wake from USB is not disabled. In many cases, bluetooth from the motherboard is a USB device.

Find the vendor code and device ID for the bluetooth adapter 

$ lsusb | grep bluetooth -i
Bus 001 Device 002: ID 8087:0039 Intel Corp. AX200 Bluetooth

Add a new udev rule for the vendor code and device ID to enable wake from suspend 

/etc/udev/rules.d/91-keyboardmousewakeup.rules
SUBSYSTEM=="usb", ATTRS{idVendor}=="8087", ATTRS{idProduct}=="0039" RUN+="/bin/sh -c 'echo enabled > /sys$env{DEVPATH}/../power/wakeup;'"

Audio

You will typically need to take an additional step to integrate the audio server with Bluetooth. This is detailed in the below sections.

See the Bluetooth headset page for more information about Bluetooth audio and Bluetooth headsets.

PulseAudio

In order to be able to use audio equipment like Bluetooth headphones or speakers, you need to install the additional pulseaudio-bluetooth package. Make sure to restart pulseaudio to make the installation take effect: pulseaudio -k. With a default PulseAudio installation you should immediately be able to stream audio from a Bluetooth device to your speakers.

If you have a system-wide PulseAudio setup make sure the user running the daemon (usually pulse) is in the lp group and you load the Bluetooth modules in your PulseAudio config: 

/etc/pulse/system.pa
...
load-module module-bluetooth-policy
load-module module-bluetooth-discover
...

PipeWire

PipeWire as of v0.3.19 enables its Bluetooth support by default, see Config Bluetooth.

ALSA

Note: Bluez5 has dropped direct integration for ALSA and supports PulseAudio only. Follow the instructions below if you cannot or do not want to use PulseAudio.

First, ensure that your Bluetooth audio device is correctly paired and connected to the system.

Then, install bluez-alsa-gitAUR, start (and enable) the bluealsa service, and add your user to the audio group.

Run the following command to check if everything is working as intended (replace XX:XX:XX:XX:XX:XX and FILE.wav below): 

$ aplay -D bluealsa:SRV=org.bluealsa,DEV=XX:XX:XX:XX:XX:XX,PROFILE=a2dp FILE.wav

Finally, add the following lines to your ~/.asoundrc: 

~/.asoundrc
defaults.bluealsa {
    service "org.bluealsa"
    device "XX:XX:XX:XX:XX:XX"
    profile "a2dp"
}

You can now use the bluealsa device to reach your Bluetooth audio device. Volume management is conducted normally via alsamixer with the option -D bluealsa.

Bluetooth serial

To get Bluetooth serial communication working on Bluetooth-to-Serial modules (HC-05, HC-06) do the following steps:

Pair your Bluetooth device using bluetoothctl as described above.

Install bluez-rfcommAUR and bluez-utils-compatAUR, as they provide certain functionality which is missing from newer tools.

Bind paired device MAC address to tty terminal: 

# rfcomm bind rfcomm0 MAC_address_of_Bluetooth_device

Now you can open /dev/rfcomm0 for serial communication: 

picocom /dev/rfcomm0 -b 115200

Troubleshooting

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: Replace hciconfig with newer commands. (Discuss in Talk:Bluetooth)

Debugging

In order to debug, first stop bluetooth.service.

And then start it with the -d parameter: 

# /usr/lib/bluetooth/bluetoothd -n -d

Another option is via the btmon tool.

Deprecated BlueZ tools

Eight BlueZ tools were deprecated and removed from bluez-utils, although not all of them were superseded by newer tools. The bluez-utils-compatAUR package provides an alternative version of bluez-utils with the deprecated tools.

Deprecated tool Most likely replacement
gatttool btgatt-client, D-Bus Gatt API
hciattach btattach
hciconfig btmgmt (and bluetoothctl?)
hcidump btmon (and btsnoop)
hcitool missing, D-Bus Device API available
rfcomm missing, implement with D-Bus Profile1 API?
ciptool
sdptool missing, functionality seems to be scattered over different D-Bus objects: Profile, Advertising, and the UUIDs arrays in device and adapter.

gnome-bluetooth

If you see this when trying to enable receiving files in bluetooth-properties: 

Bluetooth OBEX start failed: Invalid path
Bluetooth FTP start failed: Invalid path

Then make sure that the XDG user directories exist.

Bluetooth USB Dongle

If you are using a USB dongle, you should check that your Bluetooth dongle is recognized. You can do that by running journalctl -f as root when you have plugged in the USB dongle (or inspecting /var/log/messages.log). It should look something like the following (look out for hci): 

Feb 20 15:00:24 hostname kernel: [ 2661.349823] usb 4-1: new full-speed USB device number 3 using uhci_hcd
Feb 20 15:00:24 hostname bluetoothd[4568]: HCI dev 0 registered
Feb 20 15:00:24 hostname bluetoothd[4568]: Listening for HCI events on hci0
Feb 20 15:00:25 hostname bluetoothd[4568]: HCI dev 0 up
Feb 20 15:00:25 hostname bluetoothd[4568]: Adapter /org/bluez/4568/hci0 has been enabled

If you only get the first two lines, you may see that it found the device but you need to bring it up. Example: 

# btmgmt

[mgmt]# info
Index list with 1 item
hci0:	Primary controller
	addr 00:1A:7D:DA:71:10 version 6 manufacturer 10 class 0x000000
	supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising secure-conn debug-keys privacy static-addr 
	current settings: connectable discoverable bondable ssp br/edr le secure-conn 
	name Mozart
	short name 

[mgmt]# select hci0
Selected index 0

[hci0]# power up
hci0 Set Powered complete, settings: powered connectable discoverable bondable ssp br/edr le secure-conn

[hci0]# info
hci0:	Primary controller
	addr 00:1A:7D:DA:71:10 version 6 manufacturer 10 class 0x1c0104
	supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising secure-conn debug-keys privacy static-addr 
	current settings: powered connectable discoverable bondable ssp br/edr le secure-conn

Or 

# bluetoothctl

[bluetooth]# show
Controller 00:1A:7D:DA:71:10 (public)
	Name: Mozart
	Alias: Mozart
	Class: 0x0000095c
	Powered: no
	Discoverable: yes
	Pairable: yes

[bluetooth]# power on
[CHG] Controller 00:1A:7D:DA:71:10 Class: 0x001c0104
Changing power on succeeded
[CHG] Controller 00:1A:7D:DA:71:10 Powered: yes

[bluetooth]# show
Controller 00:1A:7D:DA:71:10 (public)
	Name: Mozart
	Alias: Mozart
	Class: 0x001c0104
	Powered: yes
	Discoverable: yes
	Pairable: yes

To verify that the device was detected you can use btmgmt which is part of the bluez-utils. You can get a list of available devices and their identifiers and their MAC address by issuing: 

$ btmgmt info
Index list with 1 item
hci0:	Primary controller
	addr 00:1A:7D:DA:71:10 version 6 manufacturer 10 class 0x1c0104
	supported settings: powered connectable fast-connectable discoverable bondable link-security ssp br/edr hs le advertising secure-conn debug-keys privacy static-addr 
	current settings: powered connectable discoverable bondable ssp br/edr le secure-conn

It is possible to check the Bluetooth version as mapped to the HCI version according to the table in the official specification. For example, in the previous output, HCI version 6 is Bluetooth version 4.0.

More detailed information about the device can be retrieved by using the deprecated hciconfig. (bluez-utils-compatAUR) 

$ hciconfig -a hci0
hci0:   Type: USB
        BD Address: 00:1B:DC:0F:DB:40 ACL MTU: 310:10 SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:1226 acl:0 sco:0 events:27 errors:0
        TX bytes:351 acl:0 sco:0 commands:26 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT 
        Name: 'BlueZ (0)'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 2.0 (0x3) HCI Rev: 0xc5c LMP Ver: 2.0 (0x3) LMP Subver: 0xc5c
        Manufacturer: Cambridge Silicon Radio (10)

Audio devices start to skip at short distance from dongle

If other devices share the same USB host, they can interrupt communication with audio devices. Make sure it is the only device attached to its bus. For example: 

$ lsusb
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 048d:1345 Integrated Technology Express, Inc. Multi Cardreader
Bus 001 Device 003: ID 0424:a700 Standard Microsystems Corp. 2 Port Hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

CSR Dongle 0a12:0001

The device ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) has a regression bug, and currently only works in the kernel version ≤ 3.9.11. There is a patch available for newer versions. For more information, see Kernel Bug 60824.

Logitech Bluetooth USB Dongle

There are Logitech dongles (ex. Logitech MX5000) that can work in two modes: Embedded and HCI. In embedded mode dongle emulates a USB device so it seems to your PC that you are using a normal USB mouse/keyoard.

If you hold the little red Button on the USB BT mini-receiver it will enable the other mode. Hold the red button on the BT dongle and plug it into the computer, and after 3-5 seconds of holding the button, the Bluetooth icon will appear in the system tray. Discussion

Alternatively, you can install the bluez-hid2hci package. When you connect your Logitech dongle it will automatically switch.

hcitool scan: Device not found

  • On some laptops (e.g. Dell Studio 15, Lenovo Thinkpad X1) you have to switch the Bluetooth mode from HID to HCI. Install the bluez-hid2hci package, then udev should do this automatically. Alternatively, you can run this command to switch to HCI manually:
# /usr/lib/udev/hid2hci
  • If the device will not show up and you have a Windows operating system on your machine, try booting it and enable the Bluetooth adapter from windows.
  • Sometimes also this simple command helps:
# bluetoothctl power on

bluetoothctl: No default controller available

This error may happen if the device is blocked by rfkill.

It might also happen with some intel cards (such as the 8260) to not be picked up correctly by the Bluetooth service. In some cases, using the deprecated bluez-utils-compatAUR in lieu of bluez-utils have reportedly fixed the issue.

This might also be caused by power saving measures, in which case adding the kernel parameter btusb.enable_autosuspend=n is a potential solution. See also Red Hat Bugzilla – Bug 1573562.

systemd: Condition check resulted in Bluetooth service being skipped

bluetooth.service only requires the directory /sys/class/bluetooth to exist, which should be created by kernel module bluetooth, which is only autoloaded by systemd-udev if it actually finds a working Bluetooth hardware device.

If your /sys/class/bluetooth does not exist, check if your kernel Bluetooth module is loaded by lsmod. If not, and you believe you have a Bluetooth device, you can try manually starting them by loading the Bluetooth module and restarting bluetooth.service.

You should also load your corresponding kernel Bluetooth driver when loading the bluetooth module, most likely btusb, but can also be btrtl,btintel,btbcm,bnep,btusb etc.

Check bluetooth.service's unit status to see whether it started.

See also Debian Bug report logs - #853207.

If bluetooth.service started successfully, but there is chance that you still cannot use Bluetooth normally (e.g. bluetoothctl says something like org.Bluez.Error.NotReady when you scan on). If this happens, try rebooting your computer, and double-check: whether directory /sys/class/bluetooth exists; whether lsmod includes correct Bluetooth modules; log messages in the journal; etc. systemd-udev should pickup your Bluetooth hardware automatically without manual changes again.

rfkill unblock: Do not unblock

If your device still soft blocked and you run ConnMan, try this: 

$ connmanctl enable bluetooth

Computer is not visible

Enable discoverable mode if your computer cannot be discovered from your phone: 

# bluetoothctl discoverable on

Verify that discoverable mode is on: 

# bluetoothctl show
	Powered: yes
	Discoverable: yes
	Pairable: yes
Note: Check DiscoverableTimeout and PairableTimeout in /etc/bluetooth/main.conf.

If the computer still does not show up, try changing the device class in /etc/bluetooth/main.conf as follows: 

# Default device class. Only the major and minor device class bits are
# considered.
#Class = 0x000100 # Computer Type (from default config)
Class = 0x100100 # (Object-Transfer Service & Computer Type)
Note: In some cases, Class in main.conf gets overridden after device initialization, so set the class directly with hciconfig hci0 class 100100.

A user reported that this was the only solution to make their computer visible for their phone. LG TVs (and some others) are discoverable from their audio devices, so using 000414 (the soundbar class) will make such devices appear.

See https://bluetooth-pentest.narod.ru/software/bluetooth_class_of_device-service_generator.html to generate Bluetooth device/service classes.

Foxconn / Hon Hai / Lite-On Broadcom device

Some of these devices require the firmware to be flashed into the device at boot. The firmware is not provided but can converted from a Microsoft Windows .hex file into a .hcd using hex2hcd (which is installed with bluez-utils).

In order to get the right .hex file, try searching the device vendor:product code obtained with lsusb, for example: 

...
Bus 002 Device 004: ID 04ca:2006 Lite-On Technology Corp. Broadcom BCM43142A0 Bluetooth Device
...

or 

Bus 004 Device 004: Id 0489:e031 Foxconn / Hon Hai

Alternatively, boot into Windows (a virtual machine installation will suffice) and get the firmware name from the Device Manager utility. If you want to know the model of your device but cannot see it in lsusb, you might see it in lsusb -v as iProduct.

The .hex file can be extracted from the downloaded Windows driver without having to run Windows for it. Download the right driver, for example Bluetooth Widcomm (listed among the drivers for Lifebook P771), which contains the drivers for many Broadcomm devices. In case of Bluetooth Widcomm, the driver is a self-extracting RAR archive, so it can be extracted using unrar x. To find out which of the many .hex files is the right one for you, look in the file Win32/bcbtums-win7x86-brcm.inf and search for [RAMUSBE031.CopyList], where E031 should be replaced with the product code (the second hex number in lsusb) of your device in upper-case. Underneath you should see the file name of the right .hex file.

Once you have the .hcd file, copy it into /lib/firmware/brcm/BCM.hcd - this filename is suggested by dmesg and it may change in your case so check your dmesg output in order to verify. Then reload the btusb module: 

# rmmod btusb
# modprobe btusb

The device should now be available. See BBS#162688 for information on making these changes persistent.

Intel combined WiFi and Bluetooth cards

See Wireless network configuration#Bluetooth coexistence.

Device connects, then disconnects after a few moments

If you see messages like the following in the journal, and your device fails to connect or disconnects shortly after connecting: 

bluetoothd: Unable to get connect data for Headset Voice gateway: getpeername: Transport endpoint is not connected (107)
bluetoothd: connect error: Connection refused (111)

This may be because you have already paired the device with another operating system using the same Bluetooth adapter (e.g., dual-booting). Some devices cannot handle multiple pairings associated with the same MAC address (i.e., Bluetooth adapters). Follow instructions on #Dual boot pairing for solving this issue.

Device does not connect with an error in journal

If you see a message like the following in the journal while trying to connect to a device: 

a2dp-source profile connect failed for 9C:64:40:22:E1:3F: Protocol not available

try installing pulseaudio-bluetooth and restarting PulseAudio. This error can manifest even while using only file transfer.

Device does not show up in scan

Some devices using Bluetooth low energy do not appear when scanning with bluetoothctl, for example the Logitech MX Master. The simplest way I have found to connect them is by installing bluez-utils-compatAUR, then start bluetooth.service and do: 

# bluetoothctl
[NEW] Controller (MAC) myhostname [default]

[bluetooth]# power on
[CHG] Controller (MAC) Class: 0x0c010c
Changing power on succeeded
[CHG] Controller (MAC) Powered: yes

[bluetooth]# scan on
Discovery started
[CHG] Controller (MAC) Discovering: yes

In another terminal: 

# hcitool lescan

Wait until your device shows up, then Ctrl+c hcitool. bluetoothctl should now see your device and pair normally.

Cannot receive transferred files due to symlink

If incoming file transfers fail on an an otherwise functional Bluetooth connection, the problem may be due to symlinks in your file transfer path. Logs like this would appear in the journal: 

Jun 18 11:18:13 ember obexd[3338969]: open(/home/me/.cache/obexd/MOC740): Operation not permitted (1)

If the path shown in the error message contains a symlink, then obexd by default will not accept it. The behavior can be overridden on initialization using a drop-in file for the obex.service user service: 

~/.config/systemd/user/obex.service.d/10-symlink.conf
[Service]
ExecStart=
ExecStart=/usr/lib/bluetooth/obexd --symlinks

Then reload the systemd manager configuration of the calling user and restart the obex.service user unit.

Interference between Headphones and Mouse

If you experience audio stuttering while using a Bluetooth mouse and keyboard simultaneously, you can try the following as referenced in #23 https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/424215 

# hciconfig hci0 lm ACCEPT,MASTER
# hciconfig hci0 lp HOLD,SNIFF,PARK

Bluetooth mouse laggy movements

Try edit the file /var/lib/bluetooth/XX:XX:XX:XX:XX:XX/YY:YY:YY:YY:YY:YY/info (XX:XX:XX:XX:XX:XX - your Bluetooth adapter MAC-address, YY:YY:YY:YY:YY:YY - your mouse MAC-address) and add those lines: 

[ConnectionParameters]
MinInterval=6
MaxInterval=9
Latency=44
Timeout=216

You can see your local adapter MAC address by running command hcitool dev, your can see MAC addresses of currently connected remote devices by running command hcitool con

Adapter disappears after suspend/resume

First, find vendor and product ID of the adapter. For example: 

$ lsusb -tv
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/12p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    ...
    |__ Port 3: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
        ID 8087:0025 Intel Corp. 
    |__ Port 3: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
        ID 8087:0025 Intel Corp. 
    ...

In this case, the vendor ID is 8087 and the product ID is 0025.

Then, use usb_modeswitch to reset the adapter: 

# usb_modeswitch -R -v vendor_ID -p product_ID

Problems with all BLE devices on kernel 5.9+

Starting with v5.9, the kernel Bluetooth stack tries to use link-layer privacy on BLE connections. If the device works after pairing but does not survive a reboot or suspend, it is probably because of this.

To workaround [2] this issue, open /var/lib/bluetooth/adapter_mac/device_mac/info, remove the following lines, and restart bluetooth.service: 

[IdentityResolvingKey]
Key=...

See the relevant discussion on the Arch forum.

Continually connect/disconnect with tp-link UB400 and xbox controller

Edit /etc/bluetooth/main.conf and set below settings (uncomment/change value): 

[General
JustWorksRepairing = always
FastConnectable = true
Class = 0x000100

[GATT]
ReconnectIntervals=1,1,2,3,5,8,13,21,34,55
AutoEnable=true

Then restart the bluetooth.service.

You can see relevant discussion on xpadneo but the xpadneo driver is not needed.

Problems with some Bluetooth drivers in kernel 5.10

Tango-edit-cut.pngThis section is being considered for removal.Tango-edit-cut.png

Reason: The issue is supposedly fixed. (Discuss in Talk:Bluetooth)

Starting with v5.10, some Qualcomm Atheros Bluetooth chipset drivers have stopped working with the following error: 

# journalctl --grep=hci0
Feb 22 18:40:24 user kernel: Bluetooth: hci0: do not support firmware rome 0x31010000

See the relevant bug report on the Linux.org Bugzilla.

You can either rebuild the modules with the applied patches (btusb-210681-fix), or use an old (5.9.x) kernel. This bug was fixed in linux 5.11.arch2-1.

See also