Dell Chromebook 11

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This article or section does not follow the Laptop page guidelines.

Reason: Stub (Discuss in Talk:Dell Chromebook 11)

The Dell Chromebook 11 (and newer chromebooks in general) features a "legacy boot" mode that makes it easy to boot Linux and other operating systems. The legacy boot mode is provided by the SeaBIOS payload of coreboot. SeaBIOS behaves like a traditional BIOS that boots into the MBR of a disk, and from there into your standard bootloaders like Syslinux and GRUB.

The instructions for getting Arch Linux to work on this machine are similar to the Acer C720 Chromebook, with a few differences.

Installation

First enable legacy boot / SeaBIOS from the developer mode of Chrome OS. Then install and boot Linux as you would on a traditional x86 BIOS system.

Enabling Developer Mode

See the Chromebook page.

Patching SeaBIOS

Warning: This may screw up the RW part of your firmware! If this happens, you must use a ChromeOS recovery stick to reset it.

The version of SeaBIOS that ships with the Dell Chromebook does not work properly, and therefore you must patch it in order to get it to work.

Open a crosh window with Ctrl+Alt+T.
Open a bash shell with the shell command.
Become superuser with sudo bash
Download the patched seabios.cbfs from [1], and save it to Downloads.
Patch SeaBIOS with the following commands:

# cd ~/Downloads
# flashrom -r image.rom
# dd if=seabios.cbfs of=image.rom seek=2 bs=2M conv=notrunc
# flashrom -w image.rom -i RW_LEGACY

Enabling SeaBIOS

See Chromebook#Boot to SeaBIOS by default.

Installing Arch Linux

Continue by following the Installation guide on the Chromebook page.

Post Installation Configuration

For information on general Chromebook post installation configuration (hotkeys, power key handling ...) see Post installation configuration on the Chromebook page.

Touchpad Configuration

Edit Xorg touchpad configuration file

Add the Xorg touchpad configuration below for better usability (increases touchpad sensitivity).

/etc/X11/xorg.conf.d/50-cros-touchpad.conf

Section "InputClass" 
    Identifier      "touchpad wolf cyapa" 
    MatchIsTouchpad "on" 
    MatchDevicePath "/dev/input/event*" 
    MatchProduct    "cyapa" 
    Option          "FingerLow" "5" 
    Option          "FingerHigh" "10" 
EndSection

If you want to remove the "Right Click" behavior from the touchpad from the bottom right area (you can still right click with two finger clicks), you should comment out the following section from /etc/X11/xorg.conf.d/50-synaptics.conf

/etc/X11/xorg.conf.d/50-synaptics.conf

#Section "InputClass"
#        Identifier "Default clickpad buttons"
#        MatchDriver "synaptics"
#        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
#       To disable the bottom edge area so the buttons only work as buttons,
#       not for movement, set the AreaBottomEdge
#       Option "AreaBottomEdge" "82%"
#EndSection

Hardware

Locating the Write-Protect Screw

Visit the Dell Chromebook 11 page on The Chromium Projects.

Removing the back of the laptop

This video describes the process of removing the back of the Dell Chromebook 11.

Known Issues

Touchpad right-click not functioning in X11

If the "Right Click" behavior of the touchpad is not working or it frequently fails to register left mouse clicks, try using the alternative X11 touchpad driver xf86-input-mtrack^AUR.

Unable to boot into Linux after exhausting battery

This is due to the 'dev_boot_legacy' flag being stored in volatile memory, and so being lost when the power runs out. This can be solved by enabling booting to SeaBIOS by default.