dm-crypt/Encrypting a non-root file system

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The following are examples of encrypting a secondary, i.e. non-root, filesystem with dm-crypt.

Overview

Encrypting a secondary filesystem usually protects only sensitive data, while leaving the operating system and program files unencrypted. This is useful for encrypting an external medium, such as a USB drive, so that it can be moved to different computers securely. One might also choose to encrypt sets of data separately according to who has access to it.

Because dm-crypt is a block-level encryption layer, it only encrypts whole block devices, e.g. partitions and loop devices. Encrypting individual files requires a filesystem-level encryption layer, such as eCryptfs or EncFS. See Data-at-rest encryption for general information about securing private data.

Partition

This example covers the encryption of the /home partition, but it can be applied to any other comparable non-root partition containing user data.

Tip: You can either have a single user's /home directory on a partition, or create a common partition for all user's /home directories.

First make sure the partition is empty (has no file system attached to it). Delete the partition and create an empty one if it has a file system. Then prepare the partition by securely erasing it, see Dm-crypt/Drive preparation#Secure erasure of the hard disk drive.

Create the partition which will contain the encrypted container.

Then setup the LUKS header with:

# cryptsetup options luksFormat device

Replace device with the previously created partition. See Dm-crypt/Device encryption#Encryption options for LUKS mode for details like the available options.

To gain access to the encrypted partition, unlock it with the device mapper, using:

# cryptsetup open device name

After unlocking the partition, it will be available at /dev/mapper/name. Now create a file system of your choice with:

# mkfs.fstype /dev/mapper/name

Mount the file system to /home, or if it should be accessible to only one user to /home/username, see #Manual mounting and unmounting.

Tip: Unmount and mount once to verify that the mapping is working as intended.

Manual mounting and unmounting

To mount the partition:

# cryptsetup open device name
# mount -t fstype /dev/mapper/name /mnt/home

To unmount it:

# umount /mnt/home
# cryptsetup close name
Tip: GVFS can also mount encrypted partitions. One can use a file manager with gvfs support (e.g. Thunar) to mount the partition, and a password dialog will pop-up. For other desktops, zulucryptAUR also provides a GUI.

Automated unlocking and mounting

There are three different solutions for automating the process of unlocking the partition and mounting its filesystem.

At boot time

Using the /etc/crypttab configuration file, unlocking happens at boot time by systemd's automatic parsing. This is the recommended solution if you want to use one common partition for all user's home partitions or automatically mount another encrypted block device.

See Dm-crypt/System configuration#crypttab for references and Dm-crypt/System configuration#Mounting at boot time for an example setup.

On user login

Using pam_exec it is possible to unlock (cryptsetup open) the partition on user login: this is the recommended solution if you want to have a single user's home directory on a partition. See dm-crypt/Mounting at login.

Unlocking on user login is also possible with pam_mount.

File container

Cryptsetup operates with devices, therefore a loop device is required when using a file container. But cryptsetup can take care of the loop device management in the background (see Gentoo:Custom Initramfs#Encrypted keyfile), the user is not required to invoke losetup manually.

First, start by creating an encrypted file container with dd, using an appropriate random number generator:

$ dd if=/dev/urandom of=bigsecret.img bs=100M count=1 iflag=fullblock

This will create the file bigsecret.img with a size of 100 mebibytes.

Make sure to not omit the iflag=fullblock option, otherwise dd might return a partial read. See dd#Partial read for details.

To avoid having to resize the container later on, make sure to make it larger than the total size of the files to be encrypted, plus internal file-system/metadata overhead, plus LUKS header. If you are going to use LUKS mode, its metadata header alone requires up to 16 mebibytes. Creating a file smaller than the LUKS2 header (16 MiB) will give a Requested offset is beyond real size of device bigsecret.img error when trying to open the device.

The subsequent steps are the same as described in #Partition, but instead of using a device use bigsecret.img.

In the background cryptsetup will take care of finding a free loop device and attaching the file to it. After unmouting, the file container should be closed accordingly, cryptsetup will also detach the used loop device afterwards.

Tip: Containers with dm-crypt can be very flexible. Have a look at the features and documentation of Tomb. It provides a dm-crypt script wrapper for fast and flexible handling.

Manual mounting and unmounting using losetup

To manually mount a file container with a LUKS and an ext4 filesystem inside, first find an unused loop device:

# losetup --find

Then attach the file container to a loop device, e.g. loop0:

# losetup /dev/loop0 bigsecret.img
Note: If it gives you the error /dev/loop0: No such file or directory, you need to first load the kernel module with modprobe loop as root. These days (Kernel 3.2) loop devices are created on demand. Ask for a new loop device with losetup -f as root.

Now proceed with the normal cryptsetup operation:

# cryptsetup open /dev/loop0 secret
# mount -t ext4 /dev/mapper/secret /mnt/secret

Proceed in reverse order to unmount the container properly:

# umount /mnt/secret
# cryptsetup close secret

To detach the used loop device:

# losetup --detach /dev/loop0