FiiO-BTR3 DAC

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Installation

PulseAudio has issues with supported high sample rates - set them in the configuration as default: 

/etc/pulse/daemon.conf
default-sample-rate = 192000
alternate-sample-rate = 48000

If your device still is not working, try updating the firmware.

Firmware update

Install the dfu-util package, and download the firmware:

1. Power on the BTR3 2. Hold the unlabeled button for 5 sec 3. Hold the unlabeled button and vol + button for 5 sec 4. Check if the device is found: 

dfu-util -l
Found Runtime: [0a12:ffff] ver:2520, devnum:125, cfg:1, intf:2, path:"1-6", alt:0, name:"UNKNOWN", serial:"ABCDEF0123456789"

5. Optional: Backup your firmware: 

dfu-util -d 0a12:ffff -U backup_fiio_btr3.dfu

6. Flash your new firmware: 

dfu-util -d 0a12:ffff -D BTR3-1.2-0531.dfu

7. If dfu-util ends with an Error because the device was rebooted - you are finished