Gopro-webcam

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This article or section needs language, wiki syntax or style improvements. See Help:Style for reference.

Reason: A lot of content repeats with GitHub wiki (Discuss in Talk:Gopro-webcam)

Currently there is no official support for using your GoPro 8 and 9 (the only versions that offer this feature natively) as a webcam on Linux. The web is full of incomplete tutorials for this topic. This program tries to simplify this effort.

Installation

Install the gopro-webcam^AUR package.

Usage

The following command starts the tool in the interactive mode and tries to identify the GoPro's device, find the interface and ultimately start the webcam mode:

# gopro webcam

There are a couple of options you can also set. See the --help option.

Examples

Start the webcam at a resolution of 1080p and with the linear FOV and start FFmpeg to expose the device to the OS:

# gopro webcam -a -r 1080 -f linear

Find a device that matches the pattern enx and starts the webcam mode without asking for user input (it also starts ffmpeg to expose the device to the OS):

# gopro webcam -p enx -n -a

Use the provided device enxenx9245589250e7 and do not ask for user input (just start VLC to preview the output you will get from the Camera):

# gopro webcam -d enxenx9245589250e7 -n -v

Use the provided IP 172.27.187.52 and automatically start ffmpeg to expose the device to the OS (and do not ask for user input):

# gopro webcam -i 172.27.187.52 -a -n

Start on boot

Note: The GoPro needs to be plugged in and be in 'standby' mode (Charger symbol) when the computer boots.

In order to start the webcam on boot, enable gopro_webcam.service.

If you would like to change the start parameters, edit gopro_webcam.service.

Start on plug in

gopro-webcam comes with a udev rule that will automatically start the gopro_webcam service when a GoPro Hero9 is plugged in, which may be undesirable to some users. The udev rule can be disabled as follows:

# ln -s /dev/null /etc/udev/rules.d/60-gopro.rules

To have the udev rule work with a GoPro Hero8 Black instead, change GoPro HERO9 in 60-gopro.rules to HERO8 Black.

Troubleshooting

Cannot find network device for GoPro

Double check that the USB connection mode is GoPro Connect and not MTP under Preferences > Connections > USB Connection. If that option does not exist, you likely need a firmware upgrade. Instructions can be found at https://gopro.com/en/us/update.