HP nx6310

From ArchWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tango-edit-clear.pngThis article or section does not follow the Laptop page guidelines.Tango-edit-clear.png

Reason: Stub (Discuss in Talk:HP nx6310)

Tango-view-refresh-red.pngThis article or section is out of date.Tango-view-refresh-red.png

Reason: This page is ancient (Discuss in Talk:Laptop#Old laptop pages)

Arch Linux is currently running successfully on this laptop. This is the version with a Celeron M processor, and originally with 256MB RAM and no wireless. I have since upgraded to 1GB RAM and the Intel 3945 Wireless which is the standard card for other nx6310s which come with it.

Modules

  • Ethernet: b44
  • Wireless: ipw3945
  • Audio: snd-intel
  • Video: i810

Hardware info

lspci

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

wireless

To enable the Intel 3945 Wireless card I had to install the ipw3945 package. I then added ipw3945 to the MODULES section of rc.conf and ipw3945d to the DAEMONS section before network. I use NetworkManager to handle the mutiple wireless networks I need to connect to and there were issues with no wireless devices showing up in KNetworkManager. There were two different causes of this:

  • My user was not part of the users group
  • You need to turn the wireless card on by pressing the button next to the power button - this is not needed everytime I boot up so I'm not sure what the pattern is

sound

Worked out of the box