Intel GVT-g

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Intel GVT-g is a technology that provides mediated device passthrough for Intel GPUs (Broadwell and newer). It can be used to virtualize the GPU for multiple guest virtual machines, effectively providing near-native graphics performance in the virtual machine and still letting your host use the virtualized GPU normally. This is useful if you want accelerated graphics in Windows virtual machines running on ultrabooks without dedicated GPUs for full device passthrough. (Similar technologies exist for NVIDIA and AMD GPUs, but they are available only in the "professional" GPU lines like Quadro, Radeon Pro and so on.)

There is also a variant of this technology called GVT-d - it is essentially Intel's name for full device passthrough with the vfio-pci driver. With GVT-d, the host cannot use the virtualized GPU.

Prerequisite

You will have to create a virtual GPU first, then assign it to your virtual machine. The guest with a virtual GPU sees it as a "regular" GPU - just install the latest native drivers. (The virtual GPU actually does need specialized drivers to work correctly, but all the required changes are present in the latest upstream Linux/Windows drivers.)

You will need to:

Use at least Linux 4.16 and QEMU 2.12.
Enable IOMMU by adding intel_iommu=on to your kernel parameters.
Enable kernel modules: kvmgt, vfio-iommu-type1 and mdev.
Set i915 module parameter enable_gvt=1 to enable GPU virtualization.
Add i915.enable_guc=0 to kernel parameters, see warning at Intel graphics#Enable GuC / HuC firmware loading.
Find the PCI address and domain number of your GPU ($GVT_PCI and $GVT_DOM in commands below), as it resides in /sys/bus/pci/devices. It looks like this: 0000:00:02.0 - you can look it up by running lspci -D -nn, looking for VGA compatible controller: Intel Corporation HD Graphics ... and noting down the address on the left.
Generate a virtual GPU GUID ($GVT_GUID in commands below) which you will use to create and assign the virtual GPU. A single virtual GPU can be assigned only to a single virtual machine - create as many GUIDs as you want virtual GPUs. (You can do so by running uuidgen.)

Warning: Some users report host and guest crashing when using kernel 5.12 or newer. Consider downgrading to version 5.11. See https://github.com/intel/gvt-linux/issues/188

After rebooting with the i915.enable_gvt=1 flag, you should be able to create virtual GPUs - there are multiple virtual GPU types you can create, which mainly differ in the amount of resources dedicated to that virtual GPU. You can look up what types are available in your system (and cat description inside of each type to discover what it is capable of) like this:

# ls /sys/devices/pci${GVT_DOM}/$GVT_PCI/mdev_supported_types
i915-GVTg_V5_1  # Video memory: <512MB, 2048MB>, resolution: up to 1920x1200
i915-GVTg_V5_2  # Video memory: <256MB, 1024MB>, resolution: up to 1920x1200
i915-GVTg_V5_4  # Video memory: <128MB, 512MB>, resolution: up to 1920x1200
i915-GVTg_V5_8  # Video memory: <64MB, 384MB>, resolution: up to 1024x768

Pick a type you want to use - we will refer to it as $GVT_TYPE below. Use the GUID you have created to create a virtual GPU with a chosen type:

# echo "$GVT_GUID" > "/sys/devices/pci${GVT_DOM}/$GVT_PCI/mdev_supported_types/$GVT_TYPE/create"

You can repeat this as many times as you want with different GUIDs. All created virtual GPUs will land in /sys/bus/pci/devices/$GVT_PCI/ - if you would like to remove a virtual GPU, you can do:

# echo 1 > /sys/bus/pci/devices/$GVT_PCI/$GVT_GUID/remove

libvirt qemu hook

With libvirt, a libvirt qemu hook can be used to automatically create the virtual GPU when the machine is started, and to remove it when the machine is stopped. Replace the variables with the values you found above and the DOMAIN with the name of the machine.

/etc/libvirt/hooks/qemu

#!/bin/bash
GVT_PCI=<GVT_PCI>
GVT_GUID=<GVT_GUID>
MDEV_TYPE=<GVT_TYPE>
DOMAIN=<DOMAIN name>
if [ $# -ge 3 ]; then
    if [ $1 = "$DOMAIN" -a $2 = "prepare" -a $3 = "begin" ]; then
        echo "$GVT_GUID" > "/sys/bus/pci/devices/$GVT_PCI/mdev_supported_types/$MDEV_TYPE/create"
    elif [ $1 = "$DOMAIN" -a $2 = "release" -a $3 = "end" ]; then
        echo 1 > /sys/bus/pci/devices/$GVT_PCI/$GVT_GUID/remove
    fi
fi

Do not forget to make the file executable and to quote each variable value e.g. GVT_PCI="0000:00:02.0".

Note:

If you use libvirt user session, you need to tweak the script to use privilege elevation commands, such as pkexec(1) or a no-password sudo.
The XML of the domain is feed to the hook script through stdin. You can use xmllint and XPath expression to extract GVT_GUID from stdin, e.g.:
```
GVT_GUID="$(xmllint --xpath 'string(/domain/devices/hostdev[@type="mdev"][@display="on"]/source/address/@uuid)' -)"
```

systemd service at boot

Alternatively to a QEMU hook, you can let systemd create the virtual GPU at boot. This

does not rely on libvirt
can be used without further privilege escalation as you can tell systemd to run the script as root.
appears to have no GPU performance drawbacks on the host machine as long as the virtual GPU is not used by a VM.

Create a [bash script] and place the echo command to create the virtual GPU determined in Prerequisite inside. Make it executable. Ensure the .sh requires privileges to be modified as it will be run as root at boot.

Now create a [systemd service] to run the script and give it these properties:

After=graphical.target
Type=oneshot
User=root

Assign a virtual GPU to the virtual machine

If you run qemu or libvirtd as a regular user, it may complain that some path /dev/vfio/number is not writeable. You need to enable write access to that path for the account, with chmod or setfacl.

QEMU CLI

To create a virtual machine with the virtualized GPU, add this parameter to the QEMU command line:

-device vfio-pci,sysfsdev=/sys/bus/mdev/devices/$GVT_GUID

Note: KVM must be enabled by -enable-kvm.

libvirt

Add the following device to the devices element of the virtual machine definition:

$ virsh edit vmname

...
    <hostdev mode='subsystem' type='mdev' managed='no' model='vfio-pci' display='off'>
      <source>
        <address uuid=GVT_GUID/>
      </source>
    </hostdev>
...

Replace GVT_GUID with the UUID of your virtual GPU.

Getting virtual GPU display contents

There are several possible ways to retrieve the display contents from the virtual GPU.

Using DMA-BUF display

Warning: According to this issue, this method will not work with UEFI guests using (unmodified) OVMF. Use a BIOS-based guest (e.g. using SeaBIOS) or see below for patches/workarounds.

QEMU CLI

Add display=on,x-igd-opregion=on to the end of -device vfio-pci parameter, e.g.:

-device vfio-pci,sysfsdev=/sys/bus/mdev/devices/$GVT_GUID,display=on,x-igd-opregion=on

libvirt

First, modify the XML schema of the virtual machine definition so that we can use QEMU-specific elements later. Change

$ virsh edit vmname

<domain type='kvm'>

to

$ virsh edit vmname

<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>

Then add this configuration to the end of the <domain> element, i. e. insert this text right above the closing </domain> tag:

$ virsh edit vmname

...
  <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.x-igd-opregion=on'/>
 </qemu:commandline>
...

Using DMA-BUF with UEFI/OVMF

As stated above, DMA-BUF display will not work with UEFI-based guests using (unmodified) OVMF because it will not create the necessary ACPI OpRegion exposed via QEMU's nonstandard fw_cfg interface. See this OVMF bug for details of this issue.

According to this GitHub comment, the OVMF bug report suggests several solutions to the problem. It is possible to:

patch OVMF (details) to add an Intel-specific quirk (most straightforward but non-upstreamable solution);
patch the host kernel (details) to automatically provide an option ROM for the virtual GPU containing basically the same code but in option ROM format;
extract the OpROM from the kernel patch (source) and feed it to QEMU as an override.

We will go with the last option because it does not involve patching anything. (Note: if the link and the archive go down, the OpROM can be extracted from the kernel patch by hand.)

Download vbios_gvt_uefi.rom and place it somewhere world-accessible (we will use / to make an example).

libvirt

Then edit the virtual machine definition, appending this configuration to the <qemu:commandline> element we added earlier:

$ virsh edit vmname

...
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.romfile=/vbios_gvt_uefi.rom'/>
...

Enable RAMFB display (optional)

This should be combined with the above DMA-BUF configuration in order to also display everything that happens before the guest Intel driver is loaded (i.e. POST, the firmware interface, and the guest initialization).

QEMU CLI

Add ramfb=on,driver=vfio-pci-nohotplug to the end of -device vfio-pci parameter, e.g.:

-device vfio-pci,sysfsdev=/sys/bus/mdev/devices/$GVT_GUID,display=on,x-igd-opregion=on,ramfb=on,driver=vfio-pci-nohotplug

libvirt

First, follow the first step of this section to modify the XML schema.

Then add this configuration to the end of the <domain> element, i.e. insert this text right above the closing </domain> tag:

$ virsh edit vmname

...
 <qemu:commandline>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.ramfb=on'/>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.driver=vfio-pci-nohotplug'/>
 </qemu:commandline>
...

Display virtual GPU output

Due to an issue with spice-gtk, the configuration is different depending on the SPICE client EGL implementation.

Output using QEMU GTK display

This method will get you higher refresh rate and less lag / input delay than SPICE display on weak CPUs, at least with Windows guests. Also it is less CPU-intensive than Looking Glass. But you loose useful SPICE GPU features, such as:

shared clipboard
live USB redirection (you will need to assign the USB device before booting the guest)
mouse cursor being free to come in and out of the virtual machine (will be grabbed)
integration of the display output into virt-manager (will spawn separate window for the GTK display)

The display output will only begin to work when the guest has started its proper Intel GPU driver (usually at the login screen). This means that:

It is best if you install the Intel GPU driver beforehand or use a different virtual display adapter (like -vga std or for libvirt) together with the Intel vGPU to install the Intel GPU driver, then remove the std video adapter.
You will never see the operating system booting and if it crashes before login you need to switch to a different virtual display adapter.
If you need access to the BIOS, you need to enable the RAMFB display.

Tip: In QEMU GTK, Ctrl+Alt+G grabs or releases the mouse cursor, Ctrl+Alt+F switches between windowed and fullscreen modes.

QEMU CLI

Add -display gtk,gl=on to the command line. The QEMU VGA adapter can be disabled by adding -vga none, or you have two virtual screens, and the one connected to the QEMU VGA adapter is blank.

libvirt

Ensure the above added <hostdev> device have the display attribute set to 'off'.
Ensure you have added the dummy line xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0' to your domain (from step Using DMA-BUF display).
Remove all <graphics> and <video> devices.

The QEMU GTK display window needs to be told what display output it should use to run OpenGL on. On a laptop first disconnect any external displays so you only have the laptop screen as a display. Get the number of the display that your GPU outputs to by pasting into a terminal: echo $DISPLAY An example would be :0.0 . You may now reconnect any displays you were using before. Insert the number you just determined in the env name='DISPLAY' line below.

Add the following QEMU command line arguments:

$ virsh edit vmname

...
  <qemu:commandline>
    <qemu:arg value='-display'/>
    <qemu:arg value='gtk,gl=on,zoom-to-fit=off'/>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.display=on'/>
    <qemu:env name='DISPLAY' value=':0.0'/>
  </qemu:commandline>
...

scaling

In windowed mode, -display gtk,gl=on,zoom-to-fit=off makes the GTK display window size be as large as the resolution of the guest display is, this gives you 1:1 pixel aspect ratio. Turning this on or leaving it out makes the guest display stretch/shrink to how big the GTK window happens to be (ugly scaling).

In fullscreen, you will get scaling anyways and when you change the guest resolution, the scaling only updates when lowering the resolution. When you increase the resolution the image grows larger than your display, so you need to exit fullscreen and enter it again.

GTK display CPU load

gl=es might reduce CPU load but as of Nov 2021, gl=on appears to have the edge.

Output using SPICE with MESA EGL

QEMU CLI

Add -display spice-app,gl=on to the command line. virt-viewer must be installed.

libvirt

Ensure the above added <hostdev> device have the display attribute set to 'on'.
Remove all <graphics> and <video> devices.
Add the following devices:

$ virsh edit vmname

...
    <graphics type='spice'>
      <listen type='none'/>
      <gl enable='yes'/>
    </graphics>
    <video>
      <model type='none'/>
    </video>
...

The is an optional attribute rendernode in the gl tag to allow specify the renderer, e.g.:

<gl enable='yes' rendernode='/dev/dri/by-path/pci-0000:00:02.0-render'/>

Output using SPICE with NVIDIA EGL or VNC

libvirt

Ensure the above added <hostdev> device have the display attribute set to 'on'.
Remove all <graphics> and <video> devices.
Add the following devices:

$ virsh edit vmname

...
    <graphics type='spice' autoport='yes'>
      <listen type='address'/>
    </graphics>
    <graphics type='egl-headless'/>
    <video>
      <model type='none'/>
    </video>
...

The <graphics type='spice'> type can be changed to 'vnc' to use VNC instead.

Also there is an optional tag <gl> inside <graphics type='egl-headless'> tag to force a specific renderer, do not put inside the 'spice' graphics due the mentioned bug, example:

<graphics type='egl-headless'>
  <gl rendernode='/dev/dri/by-path/pci-0000:00:02.0-render'/>
</graphics>

Disable all outputs

If all outputs are disabled, the only way to see the display output would then be using a software server like RDP, VNC or Looking Glass. See PCI_passthrough_via_OVMF#Using_Looking_Glass_to_stream_guest_screen_to_the_host for details.

QEMU CLI

In the -device vfio-pci parameter, remove ramfb=on and change to display=off. Add -vga none to disable the QEMU VGA adapter.

libvirt

To ensure no emulated GPU is added, one can edit the virtual machine configuration and do the following changes:

Remove all <graphics> devices.
Change the <video> device to be type 'none'.
Ensure the above added <hostdev> device have the display attribute set to 'off'.

Troubleshooting

Missing mdev_supported_types directory

If you have followed instructions and added i915.enable_gvt=1 kernel parameter, but there is still no /sys/bus/pci/devices/0000:02:00.0/mdev_supported_types directory, first double-check that the kvmgt module is loaded.

You should also check whether your hardware is supported. Check the output of dmesg for this message:

# dmesg | grep -i gvt

[    4.227468] [drm] Unsupported device. GVT-g is disabled

If that is the case, you may want to check upstream for support plans. For example, for the "Coffee Lake" (CFL) platform support, see https://github.com/intel/gvt-linux/issues/53

Windows hanging with bad memory error

If Windows is hanging due to a Bad Memory error look for more details via dmesg. If the host kernel logs show something like rlimit memory exceeded, you may need to increase the max memory Linux allows QEMU to allocate. Assuming you are in the group kvm, add the following to /etc/security/limits.d/42-intel-gvtg.conf and restarting the system.

# qemu kvm, need high memlock to allocate memory for vga-passthrough
@kvm - memlock 8388608

Using Intel GVT-G in combination with PRIME render offload

Using Intel GVT-G while also using NVIDIA's PRIME render offload on the host causes several issues on the guest. It is suggested to use bbswitch to keep the card powered off or use it in conjunction with Bumblebee, nvidia-xrun or optimus-manager.

No display

If your virtual machine is not displaying anything when using RAMFB display, try setting the following additional options to the existing <qemu:commandline> tag:

$ virsh edit vmname

...
  <qemu:commandline>
    <qemu:arg value="-set"/>
    <qemu:arg value="device.hostdev0.display=on"/>
  </qemu:commandline>
...

Garbled graphics

If your virtual machine is displaying artifacts when the mouse enters the virtual machine screen, the following workaround might work.

First modify the XML schema as shown on #libvirt 2.

Then, insert this right above the closing </domain> tag, taking care to add to the existing <qemu:commandline> tag, if existing:

$ virsh edit vmname

...
  <qemu:commandline>
    <qemu:env name="MESA_LOADER_DRIVER_OVERRIDE" value="i965"/>
  </qemu:commandline>
...

Host hanging when trying to suspend

After creating a GVT-g virtual GPU, host may hang when trying to suspend. See github to trace this bug.

A workaround is to remove the created GVT-g virtual GPUs before suspend and recreate the GVT-g virtual GPUs after waking from suspend. You can install gvtg_vgpu-git^AUR package to automatically do this for you.

Changing the display resolution of virtual GPU

The display resolution of vGPU, by default, is the maximum resolution the vGPU is capable of. The display content will be scaled to this resolution by vGPU regardless of what resolution is set by guest OS. This would produce bad quality pictures in the viewer.

To change the display resolution, add this configuration into the <qemu:commandline> element:

$ virsh edit vmname

...
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.xres=1440'/>
    <qemu:arg value='-set'/>
    <qemu:arg value='device.hostdev0.yres=900'/>
...

quickly setting a resolution in a windows guest

This section is being considered for removal.

Reason: The wiki is not a blogging platform, see Help:Style#Non-pertinent content and Help:Style#Language register. Instructions involving downloading executables from arbitrary sources do not belong here. (Discuss in Talk:Intel GVT-g)

You may want to have shortcuts on the desktop to change the display resolution inside the windows guest, especially with the GTK display. This way you can quickly switch from a smaller-than-display window to native-res-fulscreen.

In the guest, download ChangeScreenResolution.exe. I placed it in C:\portable\changescreenres. In that folder, create some .bat files

900p.bat

"C:\portable\changescreenres\ChangeScreenResolution.exe" /w=1600 /h=900 /f=60 /b=32 /d=\\.\DISPLAY1

1080p.bat

"C:\portable\changescreenres\ChangeScreenResolution.exe" /w=1920 /h=1080 /f=60 /b=32 /d=\\.\DISPLAY1

Then for both right-click, send to, desktop (create shortcut). You may need to go into the properties of the shortcuts and make them run as admin. If still nothing happens, you can find out which guest display to specify in the .bat files by running "C:\portable\changescreenres\ChangeScreenResolution.exe" /l in the command prompt.

Now you can use these shortcuts to quickly set a resolution before going to fullscreen / windowed mode.

Intel GVT-g

Prerequisite

libvirt qemu hook

systemd service at boot

Assign a virtual GPU to the virtual machine

QEMU CLI

libvirt

Getting virtual GPU display contents

Using DMA-BUF display

QEMU CLI

libvirt

Using DMA-BUF with UEFI/OVMF

libvirt

Enable RAMFB display (optional)

QEMU CLI

libvirt

Display virtual GPU output

Output using QEMU GTK display

QEMU CLI

libvirt

scaling

GTK display CPU load

Output using SPICE with MESA EGL

QEMU CLI

libvirt

Output using SPICE with NVIDIA EGL or VNC

libvirt

Disable all outputs

QEMU CLI

libvirt

Troubleshooting

Missing mdev_supported_types directory

Windows hanging with bad memory error

Using Intel GVT-G in combination with PRIME render offload

No display

Garbled graphics

Host hanging when trying to suspend

Changing the display resolution of virtual GPU

quickly setting a resolution in a windows guest

See also