Nokia 6230i

From ArchWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tango-edit-clear.pngThis article or section needs language, wiki syntax or style improvements. See Help:Style for reference.Tango-edit-clear.png

Reason: Just a config dump. (Discuss in Talk:Nokia 6230i)

Common settings

Install the gnokiiAUR package.

DKU2 cable

  • Edit /etc/gnokiirc
[global]
port = 1                                                                                                                       
model = series40                                                                                                               
initlength = default                                                                                                           
connection = dku2libusb                                                                                                        
use_locking = yes                                                                                                              
serial_baudrate = 19200                                                                                                        
#serial_write_usleep = 10000                                                                                                   
#handshake = software                                                                                                          
#require_dcd = 1                                                                                                               
#rfcomm_channel = 1                                                                                                            
#sm_retry = 1                                                                                                                  
#connect_script = /absolute/path/to/gnokii/Docs/sample/cimd-connect                                                            
#disconnect_script =                                                                                                           
smsc_timeout = 10                                                                                                              

[gnokiid]
bindir = /usr/sbin/

[connect_script]
TELEPHONE = 12345678

[disconnect_script]

[logging]
debug = off
rlpdebug = off
xdebug = off

In this sample libusb used as recommended.

  • Add cdc-acm module into rc.conf or load it manualy (needed for GPRS)

GPRS

NOTE: Of course you should edit following files and adjust your provider settings.

DKU2

pppd peer file (in /etc/ppp/peers/) 

/dev/ttyUSB0 57600
connect '/usr/sbin/chat -v -f /etc/ppp/peers/mts-gprs-dialup.chat'
noauth
defaultroute
lock 
debug
novjccomp 
nopcomp 
noaccomp 
nodeflate 
novj 
nobsdcomp
default-asyncmap
ipcp-accept-local
ipcp-accept-remote
usepeerdns
user mts
nodetach

chat file 

TIMEOUT 5
ECHO    ON
ABORT   '\nBUSY\r'
ABORT   '\nERROR\r'
ABORT   '\nNO ANSWER\r'
ABORT   '\nNO CARRIER\r'
ABORT   '\nNO DIALTONE\r'
ABORT   '\nRINGING\r\n\r\nRINGING\r'
              \rAT
TIMEOUT 12
OK              ATH
OK              ATE1
OK              AT+CGDCONT=1,"IP","internet.mts.ru"
OK              ATD*99***1#
CONNECT

Command to establish internet connection 

 pppd call <peer-file-name>

Bluetooth

chat file is the same as in DKU2 example

pppd peer file (in /etc/ppp/peers/) 

/dev/rfcomm0 57600
connect '/usr/sbin/chat -v -f /etc/ppp/peers/mts-gprs-dialup.chat'
noauth
defaultroute
lock 
debug
novjccomp 
nopcomp 
noaccomp 
nodeflate 
novj 
nobsdcomp
default-asyncmap
ipcp-accept-local
ipcp-accept-remote
usepeerdns
user beeline
nodetach

Commands to establish internet connection 

 rfcomm bind rfcomm0 <BT-ADDR> 1
 pppd call <peer-file-name>

Backup/restore phonebook

Backup

Use command 

 gnokii --getphonebook ME 1 end -r >phonebook-`date +%Y%m%d`.raw