Signed kernel modules

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Related articles

Signed kernel modules provide a mechanism for the kernel to verify the integrity of a module.

Overview

The Linux kernel distinguishes and keeps separate the verification of modules from requiring or forcing modules to verify before allowing them to be loaded. Kernel modules fall into 2 classes:

  • Standard in-tree modules which come with the kernel source code. They are compiled during the normal kernel build.
  • Out-of-tree modules which are not part of the kernel source distribution. They are built outside of the kernel tree, requiring the kernel headers package for each kernel they are to be built for. They can be built manually for a specific kernel and packaged, or they can be built whenever needed using DKMS.

During a standard kernel compilation, the kernel build tools create a private/public key pair and sign every in-tree module (using the private key). The public key is saved in the kernel itself. When a module is subsequently loaded, the public key can then be used to verify that the module is unchanged.

The kernel can be enabled to always verify modules and report any failures to standard logs. The choice to permit the loading and use of a module which could not be verified can be either compiled into kernel or turned on at runtime using a kernel parameter as explained below.

Summary of what needs to be done

The starting point is based on a custom kernel package as outlined in Kernel/Arch Build System. We will modify the build to sign the standard in-tree kernel modules and to provide the prerequisites for signing and verifying out-of-tree modules.

Note:

The goal is to have:

  • In-tree modules signed during the standard kernel build process. The standard kernel build creates a fresh public/private key pair on each build.
  • Out-of-tree modules are signed and the associated public key is compiled into the kernel. We will create a separate public/private key pair on each build.

Each kernel build needs to made aware of the key pair to be used for signing out-of-tree modules. A kernel configuration parameter is now used to make the kernel aware of additional signing keys: CONFIG_SYSTEM_TRUSTED_KEYS="/path/to/oot-signing_keys.pem".

Keys and signing tools will be stored in the current module build directory. Nothing needs to be done to clean this as removal is handled by the standard module cleanup. The private and public keys are both installed in /usr/lib/modules/kernel_version-build/certs-local.

Kernel configuration

CONFIG_SYSTEM_TRUSTED_KEYS will be updated automatically using the script fix_config.sh provided below. In addition, the following configuration options should be set either manually by editing the .config file, or via make menuconfig in the Linux src directory and subsequently copying the updated .config file back to the build file config. 

Enable Loadable module suppot --->
Module Signature Verification           -  activate
        CONFIG_MODULE_SIG=y

Require modules to be validly signed -> leave off
        CONFIG_MODULE_SIG_FORCE=n

        This allows the decision to enforce verified modules only as boot command line.
        If you are comfortable all is working then by all means change this to 'y'
        Command line version of this is : module.sig_enforce=1

Automatically sign all modules  - activate
Which hash algorithm    -> SHA-512

Compress modules on installation        - activate
        Compression algorithm (XZ)

Allow loading of modules with missing namespace imports - set to no

Kernel command line

When you have confirmed that the modules are being signed and that the kernel works as it should, you can enable the following kernel parameter to require that the kernel only permits verified modules to be loaded: 

module.sig_enforce=1

Before forcing verified modules on, please confirm that the system logs do not show any module signature failures being reported.

Tools needed

kernel build package

In the directory where the kernel package is built: 

$ mkdir certs-local

This directory will provide the tools to create the keys, as well as signing kernel modules.

Put the 4 files into certs-local:

  • fix_config.sh
  • x509.oot.genkey
  • genkeys.sh
  • sign_manual.sh

The files genkeys.sh and its configuration file x509.oot.genkey are used to create key pairs.

The file fix_config.sh is run after that to provide the kernel with the key information by updating the configuration file used to build the kernel.

The script sign_manual will be used to sign out-of-tree kernel modules.

genkeys.sh will create the key pairs in a directory named by date-time.

It also creates file current_key_dir with that directory name and a soft link current to the same directory holding the current key pairs.

These files are all provided below.

DKMS support

$ mkdir certs-local/dkms

Add 2 files to the dkms directory:

  • kernel-sign.conf
  • kernel-sign.sh

These will be installed in /etc/dkms and provide the means for DKMS to automatically sign modules using the local key. This is the recommended way to sign out-of-tree kernel modules. As explained below, once this is installed, all that is needed is for DKMS to automatically sign modules is to make a soft link for each module to the configuration file. 

$ cd /etc/dkms
# ln -s kernel-sign.conf module_name.conf

For example: 

# ln -s kernel-sign.conf vboxdrv.conf

The link creation can easily be added to an arch package to simplify further if desired.

Modify PKGBUILD

We need to make changes to kernel build as follows:

prepare()

Add the following to the top of the prepare() function: 

prepare() {

    msg2 "Rebuilding local signing key..."
    cd ../certs-local
    ./genkeys.sh 

    msg2 "Updating kernel config with new key..."
    ./fix_config.sh ../config
    cd ../src

    ... 
}

_package-headers()

Add the following to the bottom of the _package-headers() function: 

_package-headers() {

    ...

    #
    # Out-of-tree module signing
    # This is run in the kernel source / build directory
    #
    msg2 "Local Signing certs for out-of-tree modules..."

    certs_local_src="../../certs-local" 
    key_dir=$(<${certs_local_src}/current_key_dir)

    certs_local_dst="${builddir}/certs-local"
    signer="sign_manual.sh"
    mkdir -p ${certs_local_dst}
    rsync -a $certs_local_src/{current,$key_dir,$signer} $certs_local_dst/

    # DKMS tools
    dkms_src="$certs_local_src/dkms"
    dkms_dst="${pkgdir}/etc/dkms"
    mkdir -p $dkms_dst

    rsync -a $dkms_src/{kernel-sign.conf,kernel-sign.sh} $dkms_dst/
}

Files required

The 6 supporting files referenced above are available for download from the github.com/gene-git/Arch-SKM repository:

Remember to ensure that the scripts are executable.

Helper scripts

Tango-inaccurate.pngThe factual accuracy of this article or section is disputed.Tango-inaccurate.png

Reason: The arch-sign-modulesAUR package comes from a fork of the Arch-SKM repository which is used in the previous sections. It is not clear what is wrong with the original repository nor why changes resulted in a fork instead of fixing/improving the original repository. (Discuss in Talk:Signed kernel modules)

arch-sign-modulesAUR builds:

& other AUR kernels.

with signed kernel module support for: