TORQUE

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Related articles

Warning: TORQUE is not free software anymore.

TORQUE is a resource manager providing control over batch jobs and distributed compute nodes. Basically, one can setup a home or small office Linux cluster and queue jobs with this software. A cluster consists of one head node and many compute nodes. The head node runs the torque-server daemon and the compute nodes run the torque-client daemon. The head node also runs a scheduler daemon.

Installation

Note: Although TORQUE is a very powerful queuing system, if the goal of the cluster is solely to increase compilation throughput, distcc is a much easier and elegant solution.

Install the torqueAUR package found in the AUR.

Must haves

/etc/hosts

Make sure that /etc/hosts on all of the boxes in the cluster contains the hostnames of every PC in the cluster. Example, cluster consists of 3 PCs, mars, phobos, and deimos. 

192.168.0.20   mars
192.168.0.21   phobos
192.168.0.22   deimos

Firewall configuration (if installed)

Be sure to open TCP for all machines using TORQUE.

The pbs_server (server) and pbs_mom (client) by default use TCP and UDP ports 15001-15004. pbs_mom (client) also uses UDP ports 1023 and below if privileged ports are configured (the default).

NFS

Technically, one does not need to use NFS but doing so simplifies the whole process. An NFS share either on the server or another machine is highly recommended to simplify the process of sharing common build disk space.

Setup

Server (head node) configuration

Follow these steps on the head node/scheduler.

Edit /var/spool/torque/server_name to name the head node. It is recommended to match the hostname in /etc/hostname for simplicity's sake.

Create and configure the torque server: 

# pbs_server -t create
PBS_Server localhost.localdomain: Create mode and server database exists,
do you wish to continue y/(n)?y

Then start trqauthd by running 

# trqauthd

A minimal set of options are provided here. Adjust the first line substituting "mars" with the hostname entered in /var/spool/torque/server_name: 

qmgr -c "set server acl_hosts = mars"
qmgr -c "set server scheduling=true"
qmgr -c "create queue batch queue_type=execution"
qmgr -c "set queue batch started=true"
qmgr -c "set queue batch enabled=true"
qmgr -c "set queue batch resources_default.nodes=1"
qmgr -c "set queue batch resources_default.walltime=3600"
qmgr -c "set server default_queue=batch"

It may be of interest to keep finished jobs in the queue for a period of time. 

qmgr -c "set server keep_completed = 86400"

Here, 86400 sec = 24 h after which point, the job will be auto removed from the queue. One can see the full log of jobs removed from the queue with the -f switch on qstat: 

qstat -f

Verify the server config with this command: 

# qmgr -c 'p s'

Edit /var/spool/torque/server_priv/nodes adding all compute nodes. Again, it is recommended to match the hostname(s) of the machines on the LAN. The syntax is HOSTNAME np=x gpus=y properties

  • HOSTNAME=the hostname of the machine
  • np=number of processors
  • gpus=number of gpus
  • properties=comments

Only the hostname is required, all other fields are optional.

Example: 

mars np=4
phobos np=2
deimos np=2
Note:
  • One can run both the server and client on the same box.
  • Re-running pbs_server -t create may delete this nodes file.

Restart the server and the new options are sourced.

Client (compute node) configuration

Follow these steps on each compute node in the cluster.

Note: If running both the server and client on the same box, be sure to complete these steps as well for that machine as well as other pure clients on the cluster.

Edit /var/spool/torque/mom_priv/config to contain some basic info identifying the server: 

$pbsserver      mars          # note: this is the hostname of the headnode
$logevent       255           # bitmap of which events to log

Restart the server

That should be it. Now restart the server so the settings can take effect. 

# killall -s 9 pbs_server
# pbs_server

Starting the client(s)

In order to start the clients run the following on each of the clients, including the server if it is also a client: 

# pbs_mom

Verifying cluster status

To check the status of the cluster, issue the following: 

$ pbsnodes -a

Each node if up should indicate that it is ready to receive jobs echoing a state of free. If a node is not working, it will report a state of down.

Example output: 

     mars
     state = free
     np = 4
     ntype = cluster
     status = rectime=1308479899,varattr=,jobs=0.localhost.localdomain,state=free,netload=1638547057,
gres=,loadave=2.69,ncpus=4,physmem=8195892kb,availmem=7172508kb,totmem=8195892kb,
idletime=24772,nusers=1,nsessions=5,sessions=1333 1349 1353 1388 9095,
uname=Linux mars 2.6.39-ck #1 SMP PREEMPT Sat Jun 18 14:19:01 EDT 2011 x86_64,opsys=linux
     mom_service_port = 15002
     mom_manager_port = 15003
     gpus = 2

phobos
     state = free
     np = 2
     ntype = cluster
     status = rectime=1308479933,varattr=,jobs=,state=free,netload=1085755815,
gres=,loadave=2.84,ncpus=2,physmem=4019704kb,availmem=5753552kb,totmem=6116852kb,
idletime=7324,nusers=2,nsessions=6,sessions=1565 1562 1691 1716 1737 1851,
uname=Linux phobos 2.6.37-ck #1 SMP PREEMPT Sun Apr 3 17:16:35 EDT 2011 x86_64,opsys=linux
     mom_service_port = 15002
     mom_manager_port = 15003
     gpus = 1

deimos
     state = free
     np = 2
     ntype = cluster
     status = rectime=1308479890,varattr=,jobs=2.localhost.localdomain,state=free,netload=527239670,
gres=,loadave=0.52,ncpus=2,physmem=4057808kb,availmem=3955624kb,totmem=4057808kb,
idletime=644,nusers=1,nsessions=1,sessions=865,
uname=Linux deimos 2.6.39-ck #1 SMP PREEMPT Sat Jun 11 12:36:21 EDT 2011 x86_64,opsys=linux
     mom_service_port = 15002
     mom_manager_port = 15003
     gpus = 1

Queuing jobs

Queuing to the cluster is accomplished via the qsub command.

A trivial test is to simply run sleep: 

$ echo "sleep 30" | qsub

Check the status of the queue via the qstat command described below. At this point, the work will have a status of "Q" which means queued. To start it, run the scheduler: 

# pbs_sched

One can modify the torque-server systemd daemon to activate pbs_sched at boot.

Another usage of qsub is to name a job and queue a script: 

$ qsub -N x264 /home/facade/bin/x264_HQ.sh
Note: STDOUT and STDERR for a queued job will be logged by default in the form text files corresponding to the respective outputs pid.o and pid.e and will be written to the path from which the qsub command was issued.

Another example can use a wrapper script to make and queue work en mass automatically.

Checking job status

qstat is used to check work status. 

$ qstat
Job id                    Name             User            Time Use S Queue
------------------------- ---------------- --------------- -------- - -----
13.localhost               generic-i686.pbs facade         00:05:06 R batch          
14.localhost               atom-i686.pbs    facade         00:03:09 R batch          
15.localhost               core2-i686.pbs   facade         00:01:02 R batch          
16.localhost               k7-i686.pbs      facade                0 Q batch          
17.localhost               k8-i686.pbs      facade                0 Q batch          
18.localhost               k10-i686.pbs     facade                0 Q batch          
19.localhost               p4-i686.pbs      facade                0 Q batch          
20.localhost               pentm-i686.pbs   facade                0 Q batch          
21.localhost               ...ic-x86_64.pbs facade                0 Q batch          
22.localhost               atom-x86_64.pbs  facade                0 Q batch          
23.localhost               core2-x86_64.pbs facade                0 Q batch          
24.localhost               k8-x86_64.pbs    facade                0 Q batch          
25.localhost               k10-x86_64.pbs   facade                0 Q batch

Append the -n switch to see which nodes are doing which jobs. 

$ qstat -n
localhost.localdomain:
405.localhost.lo     facade  batch    i686-generic       3035     1   0    --  01:00 C 00:12
   mars/3+mars/2+mars/1+mars/0
406.localhost.lo     facade  batch    i686-atom          5768     1   0    --  01:00 C 00:46
   phobos/1+phobos/0
407.localhost.lo     facade  batch    i686-core2        22941     1   0    --  01:00 C 00:12
   mars/3+mars/2+mars/1+mars/0
408.localhost.lo     facade  batch    i686-k7           10152     1   0    --  01:00 C 00:12
   mars/3+mars/2+mars/1+mars/0
409.localhost.lo     facade  batch    i686-k8           29657     1   0    --  01:00 C 00:12
   mars/3+mars/2+mars/1+mars/0
410.localhost.lo     facade  batch    i686-k10          16838     1   0    --  01:00 C 00:12
   mars/3+mars/2+mars/1+mars/0
411.localhost.lo     facade  batch    i686-p4           25340     1   0    --  01:00 C 00:46
   deimos/1+deimos/0
412.localhost.lo     facade  batch    i686-pentm        12544     1   0    --  01:00 R 00:20
   phobos/1+phobos/0
413.localhost.lo     facade  batch    x86_64-generic     4024     1   0    --  01:00 C 00:13
   mars/3+mars/2+mars/1+mars/0
414.localhost.lo     facade  batch    x86_64-atom       19330     1   0    --  01:00 C 00:13
   mars/3+mars/2+mars/1+mars/0
415.localhost.lo     facade  batch    x86_64-core2       2146     1   0    --  01:00 C 00:13
   mars/3+mars/2+mars/1+mars/0
416.localhost.lo     facade  batch    x86_64-k8         17234     1   0    --  01:00 R 00:11
   mars/3+mars/2+mars/1+mars/0
417.localhost.lo     facade  batch    x86_64-k10          --      1   0    --  01:00 Q   -- 
    --

See also