lm_sensors (简体中文)

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Gnome-colors-add-files-to-archive.pngThis article is being considered for archiving.Gnome-colors-add-files-to-archive.png

Reason: 2008 年打后沒進度 (Discuss in Talk:Lm sensors (简体中文))

Tango-preferences-desktop-locale.png本文或本节需要翻译。要贡献翻译,请访问简体中文翻译团队Tango-preferences-desktop-locale.png

附注: 於 2008 年打后沒更新(在 Talk:Lm sensors (简体中文)# 中讨论)

本文描述了如何安装、配置和使用lm_sensors来监控CPU和主板温度以及风扇速度。

安装lm_sensors

使用Pacman安装软件包

# pacman -S lm_sensors

配置lm_sensors

使用sensors-detect检测并生成内核模块列表

# sensors-detect

这将在/etc/sysconfig/lm_sensors里创建配置

/etc/rc.conf的DAEMONS列表里加入sensors,使得启动时自动加载内核模块:

DAEMONS=(syslog-ng crond ... sensors ...)

为了测试配置是否成功,现在就运行初始化脚本加载内核模块

# /etc/rc.d/sensors start

然后执行sensors命令

$ sensors

你会看到象这样的输出显式:

lm85-i2c-0-2e
Adapter: SMBus I801 adapter at c800
V1.5:       +1.47 V  (min =  +0.00 V, max =  +3.32 V)
VCore:      +1.34 V  (min =  +0.00 V, max =  +2.99 V)
V3.3:       +3.32 V  (min =  +0.00 V, max =  +4.38 V)
V5:        +5.05 V  (min =  +0.00 V, max =  +6.64 V)
V12:      +11.94 V  (min =  +0.00 V, max = +15.94 V)
CPU_Fan:   1760 RPM  (min =    0 RPM)
fan2:         0 RPM  (min =    0 RPM)
fan3:         0 RPM  (min =    0 RPM)
fan4:         0 RPM  (min =    0 RPM)
CPU Temp:    +51°C  (low  =  -127°C, high =  +127°C)
Board Temp:
             +46°C  (low  =  -127°C, high =  +127°C)
Remote Temp:
             +45°C  (low  =  -127°C, high =  +127°C)
CPU_PWM:    77 
Fan2_PWM:   87 
Fan3_PWM:   87 
vid:      +1.088 V  (VRM Version 10.0)

使用lm_sensors

现在你应该可以使用lm_sensors的前端工具程序如gkrellmxfce4-sensors-pluginGNOME Computer Temperature Monitor以及ksensors