ZFS (简体中文)
ZFS ZFS，一个文件系统，拥有逻辑卷管理功能，最早源自于Sun公司为Solaris操作系统开发的文件系统。ZFS是一个具有高存储容量、文件系统与卷管理概念集成、崭新的磁盘逻辑结构的轻量级文件系统，同时也是一个便捷的存储池管理系统。ZFS是一个使用通用开发与散布许可证授权的开源项目，这个商标名称现由甲骨文公司拥有。 ZFS的特性包括: 存储池 (不同于传统文件系统需要驻留于单独设备或者需要一个卷管理系统去使用一个以上的设备，ZFS创建在虚拟的，被称为“zpools”的存储池之上), 写时拷贝事务模型, 快照与克隆, 数据自动校验与恢复(, RAID-Z,ZFS是一个128位的文件系统，这意味着它能存储1800亿亿（18.4 × 1018）倍于当前64位文件系统的数据。ZFS的设计如此超前以至于这个极限就当前现实实际可能永远无法遇到。
ZOL是一个由Lawrence Livermore National Laboratory赞助的项目，旨在开发用于Linux计算机的ZFS阵列。
因此:
- ZFS 只存在于 Arch User Repository 以及非官方的 archzfs 源。
- ZFSonLinux 项目必须紧跟Kernel的发行与Arch维护者共同推出更新。
- 大部分情况下，ZFSonLinux的发行并不能与Kernel同步，因而可能无法及时升级最新的Kernel。
安装
通用
从 Arch User Repository 或者 archzfs 源安装:
- zfs-linuxAUR 来安装 [https://zfsonlinux.org/ 稳定内核。
- zfs-linux-gitAUR 来安装 development 最新的内核。
- zfs-linux-ltsAUR 来安装LTS版本的内核。
- zfs-dkmsAUR 来安装Dynamic Kernel Module Support (简体中文)支持。
这些分支所需 zfs-utils, spl-linux, spl-utils-linux 依赖. SPL (Solaris Porting Layer) 是一个Linux内核模块, 为ZFS实现了Solaris APIs.
在命令行中输入 zpool status 来测试安装. 如果产生"insmod"错误, 请尝试depmod -a.
Root on ZFS
When performing an Arch install on ZFS, zfs-gitAUR[损坏的链接：package not found] and its dependencies can be installed in the archiso environment as outlined in the previous section.
It may be useful to prepare a customized archiso with ZFS support builtin. For a much more detailed guide on installing Arch with ZFS as its root file system, see Installing Arch Linux on ZFS.
DKMS
Users can make use of DKMS Dynamic Kernel Module Support to rebuild the ZFS modules automatically with every kernel upgrade.
Install zfs-dkmsAUR or zfs-dkms-gitAUR and apply the post-install instructions given by these packages.
IgnorePkg entry to pacman.conf to prevent these packages from upgrading when doing a regular update.Experimenting with ZFS
Users wishing to experiment with ZFS on virtual block devices (known in ZFS terms as VDEVs) which can be simple files like ~/zfs0.img ~/zfs1.img ~/zfs2.img etc. with no possibility of real data loss are encouraged to see the Experimenting with ZFS article. Common tasks like building a RAIDZ array, purposefully corrupting data and recovering it, snapshotting datasets, etc. are covered.
Configuration
ZFS is considered a "zero administration" filesystem by its creators; therefore, configuring ZFS is very straight forward. Configuration is done primarily with two commands: zfs and zpool.
Automatic Start
For ZFS to live by its "zero administration" namesake, the zfs daemon must be loaded at startup. A benefit to this is that it is not necessary to mount the zpool in /etc/fstab; the zfs daemon can import and mount zfs pools automatically. The daemon mounts the zfs pools reading the file /etc/zfs/zpool.cache.
For each pool you want automatically mounted by the zfs daemon execute:
# zpool set cachefile=/etc/zfs/zpool.cache <pool>
Enable the service so it is automatically started at boot time:
# systemctl enable zfs.target
To manually start the daemon:
# systemctl start zfs.target
See https://github.com/archzfs/archzfs/issues/72 for more information.
In order to mount zfs pools automatically on boot you need to enable the following services:
# systemctl enable zfs-import-cache # systemctl enable zfs-mount
Create a storage pool
Use # parted --list to see a list of all available drives. It is not necessary nor recommended to partition the drives before creating the zfs filesystem.
Having identified the list of drives, it is now time to get the id's of the drives to add to the zpool. The zfs on Linux developers recommend using device ids when creating ZFS storage pools of less than 10 devices. To find the id's, simply:
# ls -lh /dev/disk/by-id/
The ids should look similar to the following:
lrwxrwxrwx 1 root root 9 Aug 12 16:26 ata-ST3000DM001-9YN166_S1F0JKRR -> ../../sdc lrwxrwxrwx 1 root root 9 Aug 12 16:26 ata-ST3000DM001-9YN166_S1F0JTM1 -> ../../sde lrwxrwxrwx 1 root root 9 Aug 12 16:26 ata-ST3000DM001-9YN166_S1F0KBP8 -> ../../sdd lrwxrwxrwx 1 root root 9 Aug 12 16:26 ata-ST3000DM001-9YN166_S1F0KDGY -> ../../sdb
Disk labels and UUID can also be used for ZFS mounts by using GPT partitions. ZFS drives have labels but Linux is unable to read them at boot. Unlike MBR partitions, GPT partitions directly support both UUID and labels independent of the format inside the partition. Partitioning rather than using the whole disk for ZFS offers two additional advantages. The OS does not generate bogus partition numbers from whatever unpredictable data ZFS has written to the partition sector, and if desired, you can easily over provision SSD drives, and slightly over provision spindle drives to ensure that different models with slightly different sector counts can zpool replace into your mirrors. This is a lot of organization and control over ZFS using readily available tools and techniques at almost zero cost.
Use gdisk to partition the all or part of the drive as a single partition. gdisk does not automatically name partitions so if partition labels are desired use gdisk command "c" to label the partitions. Some reasons you might prefer labels over UUID are: labels are easy to control, labels can be titled to make the purpose of each disk in your arrangement readily apparent, and labels are shorter and easier to type. These are all advantages when the server is down and the heat is on. GPT partition labels have plenty of space and can store most international characters wikipedia:GUID_Partition_Table#Partition_entries allowing large data pools to be labeled in an organized fashion.
Drives partitioned with GPT have labels and UUID that look like this.
# ls -l /dev/disk/by-partlabel # lrwxrwxrwx 1 root root 10 Apr 30 01:44 zfsdata1 -> ../../sdd1 # lrwxrwxrwx 1 root root 10 Apr 30 01:44 zfsdata2 -> ../../sdc1 # lrwxrwxrwx 1 root root 10 Apr 30 01:59 zfsl2arc -> ../../sda1
# ls -l /dev/disk/by-partuuid # lrwxrwxrwx 1 root root 10 Apr 30 01:44 148c462c-7819-431a-9aba-5bf42bb5a34e -> ../../sdd1 # lrwxrwxrwx 1 root root 10 Apr 30 01:59 4f95da30-b2fb-412b-9090-fc349993df56 -> ../../sda1 # lrwxrwxrwx 1 root root 10 Apr 30 01:44 e5ccef58-5adf-4094-81a7-3bac846a885f -> ../../sdc1
Now, finally, create the ZFS pool:
# zpool create -f -m <mount> <pool> raidz <ids>
- create: subcommand to create the pool.
- -f: Force creating the pool. This is to overcome the "EFI label error". See #Does not contain an EFI label.
-
-m: The mount point of the pool. If this is not specified, then the pool will be mounted to
/<pool>.
- pool: This is the name of the pool.
- raidz: This is the type of virtual device that will be created from the pool of devices. Raidz is a special implementation of raid5. See Jeff Bonwick's Blog -- RAID-Z for more information about raidz.
-
ids: The names of the drives or partitions that to include into the pool. Get it from
/dev/disk/by-id.
Here is an example for the full command:
# zpool create -f -m /mnt/data bigdata \
raidz \
ata-ST3000DM001-9YN166_S1F0KDGY \
ata-ST3000DM001-9YN166_S1F0JKRR \
ata-ST3000DM001-9YN166_S1F0KBP8 \
ata-ST3000DM001-9YN166_S1F0JTM1
Advanced format disks
In case Advanced Format disks are used which have a native sector size of 4096 bytes instead of 512 bytes, the automated sector size detection algorithm of ZFS might detect 512 bytes because the backwards compatibility with legacy systems. This would result in degraded performance. To make sure a correct sector size is used, the ashift=12 option should be used (See the ZFS on Linux FAQ). The full command would in this case be:
# zpool create -f -o ashift=12 -m /mnt/data bigdata \
raidz \
ata-ST3000DM001-9YN166_S1F0KDGY \
ata-ST3000DM001-9YN166_S1F0JKRR \
ata-ST3000DM001-9YN166_S1F0KBP8 \
ata-ST3000DM001-9YN166_S1F0JTM1
Verifying pool creation
If the command is successful, there will be no output. Using the $ mount command will show that the pool is mounted. Using # zpool status will show that the pool has been created.
# zpool status
pool: bigdata
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
bigdata ONLINE 0 0 0
-0 ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0KDGY-part1 ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0JKRR-part1 ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0KBP8-part1 ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0JTM1-part1 ONLINE 0 0 0
errors: No known data errors
At this point it would be good to reboot the machine to ensure that the ZFS pool is mounted at boot. It is best to deal with all errors before transferring data.
GRUB-compatible pool creation
By default, zpool will enable all features on a pool. If /boot resides on ZFS and when using GRUB, you must only enable read-only, or non-read-only features supported by GRUB, otherwise GRUB will not be able to read the pool. As of GRUB 2.02.beta3, GRUB supports all features in ZFS-on-Linux 0.6.5.7. However, the Git master branch of ZoL contains one extra feature, large_dnodes that is not yet supported by GRUB.
This example line is only necessary if you are using the Git branch of ZoL:
# zpool create -f -d \
-o feature@async_destroy=enabled \
-o feature@empty_bpobj=enabled \
-o feature@lz4_compress=enabled \
-o feature@spacemap_histogram=enabled \
-o feature@enabled_txg=enabled \
-o feature@hole_birth=enabled \
-o feature@bookmarks=enabled \
-o feature@filesystem_limits \
-o feature@embedded_data=enabled \
-o feature@large_blocks=enabled \
<pool_name> <vdevs>
Importing a pool created by id
Eventually a pool may fail to auto mount and you need to import to bring your pool back. Take care to avoid the most obvious solution.
# ###zpool import zfsdata # Do not do this! Always use -d
This will import your pools using /dev/sd? which will lead to problems the next time you rearrange your drives. This may be as simple as rebooting with a USB drive left in the machine, which harkens back to a time when PC's would not boot when a floppy disk was left in a machine. Adapt one of the following commands to import your pool so that pool imports retain the persistence they were created with.
# zpool import -d /dev/disk/by-id zfsdata # zpool import -d /dev/disk/by-partlabel zfsdata # zpool import -d /dev/disk/by-partuuid zfsdata
Tuning
General
Many parameters are available for zfs file systems, you can view a full list with zfs get all <pool>. Two common ones to adjust are atime and compression.
Atime is enabled by default but for most users, it represents superfluous writes to the zpool and it can be disabled using the zfs command:
# zfs set atime=off <pool>
As an alternative to turning off atime completely, relatime is available. This brings the default ext4/xfs atime semantics to ZFS, where access time is only updated if the modified time or changed time changes, or if the existing access time has not been updated within the past 24 hours. It is a compromise between atime=off and atime=on. This property only takes effect if atime is on:
# zfs set relatime=on <pool>
Compression is just that, transparent compression of data. ZFS supports a few different algorithms, presently lz4 is the default. gzip is also available for seldom-written yet highly-compressable data; consult the man page for more details. Enable compression using the zfs command:
# zfs set compression=on <pool>
Other options for zfs can be displayed again, using the zfs command:
# zfs get all <pool>
SSD Caching
You can also add SSD devices as a write intent log (external ZIL or SLOG) and also as a layer 2 adaptive replacement cache (l2arc). The process to add them is very similar to creating a new VDEV.
All of the below references to device-id are the IDs from /dev/disk/by-id/*
To add a ZIL:
zpool add <pool> log <device-id>
or to add a mirrored ZIL:
zpool add <pool> log mirror <device-id-1> <device-id-2>
To add an l2arc:
zpool add <pool> cache <device-id>
or to add a mirrored l2arc:
zpool add <pool> cache mirror <device-id-1> <device-id-2>
Database
ZFS, unlike most other file systems, has a variable record size, or what is commonly referred to as a block size. By default, the recordsize on ZFS is 128KiB, which means it will dynamically allocate blocks of any size from 512B to 128KiB depending on the size of file being written. This can often help fragmentation and file access, at the cost that ZFS would have to allocate new 128KiB blocks each time only a few bytes are written to.
Most RDBMSes work in 8KiB-sized blocks by default. Although the block size is tunable for MySQL/MariaDB, PostgreSQL, and Oracle, all three of them use an 8KiB block size by default. For both performance concerns and keeping snapshot differences to a minimum (for backup purposes, this is helpful), it is usually desirable to tune ZFS instead to accommodate the databases, using a command such as:
# zfs set recordsize=8K <pool>/postgres
These RDBMSes also tend to implement their own caching algorithm, often similar to ZFS's own ARC. In the interest of saving memory, it is best to simply disable ZFS's caching of the database's file data and let the database do its own job:
# zfs set primarycache=metadata <pool>/postgres
If your pool has no configured log devices, ZFS reserves space on the pool's data disks for its intent log (the ZIL). ZFS uses this for crash recovery, but databases are often syncing their data files to the file system on their own transaction commits anyway. The end result of this is that ZFS will be committing data twice to the data disks, and it can severely impact performance. You can tell ZFS to prefer to not use the ZIL, and in which case, data is only committed to the file system once. Setting this for non-database file systems, or for pools with configured log devices, can actually negatively impact the performance, so beware:
# zfs set logbias=throughput <pool>/postgres
These can also be done at file system creation time, for example:
# zfs create -o recordsize=8K \
-o primarycache=metadata \
-o mountpoint=/var/lib/postgres \
-o logbias=throughput \
<pool>/postgres
Please note: these kinds of tuning parameters are ideal for specialized applications like RDBMSes. You can easily hurt ZFS's performance by setting these on a general-purpose file system such as your /home directory.
/tmp
If you would like to use ZFS to store your /tmp directory, which may be useful for storing arbitrarily-large sets of files or simply keeping your RAM free of idle data, you can generally improve performance of certain applications writing to /tmp by disabling file system sync. This causes ZFS to ignore an application's sync requests (eg, with fsync or O_SYNC) and return immediately. While this has severe application-side data consistency consequences (never disable sync for a database!), files in /tmp are less likely to be important and affected. Please note this does not affect the integrity of ZFS itself, only the possibility that data an application expects on-disk may not have actually been written out following a crash.
# zfs set sync=disabled <pool>/tmp
Additionally, for security purposes, you may want to disable setuid and devices on the /tmp file system, which prevents some kinds of privilege-escalation attacks or the use of device nodes:
# zfs set setuid=off <pool>/tmp # zfs set devices=off <pool>/tmp
Combining all of these for a create command would be as follows:
# zfs create -o setuid=off -o devices=off -o sync=disabled -o mountpoint=/tmp <pool>/tmp
Please note, also, that if you want /tmp on ZFS, you will need to mask (disable) systemd's automatic tmpfs-backed /tmp, else ZFS will be unable to mount your dataset at boot-time or import-time:
# systemctl mask tmp.mount
ZVOLs
ZFS volumes (ZVOLs) can suffer from the same block size-related issues as RDBMSes, but it is worth noting that the default recordsize for ZVOLs is 8KiB already. If possible, it is best to align any partitions contained in a ZVOL to your recordsize (current versions of fdisk and gdisk by default automatically align at 1MiB segments, which works), and file system block sizes to the same size. Other than this, you might tweak the recordsize to accommodate the data inside the ZVOL as necessary (though 8KiB tends to be a good value for most file systems, even when using 4KiB blocks on that level).
RAIDZ and Advanced Format physical disks
Each block of a ZVOL gets its own parity disks, and if you have physical media with logical block sizes of 4096B, 8192B, or so on, the parity needs to be stored in whole physical blocks, and this can drastically increase the space requirements of a ZVOL, requiring 2× or more physical storage capacity than the ZVOL's logical capacity. Setting the recordsize to 16k or 32k can help reduce this footprint drastically.
See ZFS on Linux issue #1807 for details
Usage
Users can optionally create a dataset under the zpool as opposed to manually creating directories under the zpool. Datasets allow for an increased level of control (quotas for example) in addition to snapshots. To be able to create and mount a dataset, a directory of the same name must not pre-exist in the zpool. To create a dataset, use:
# zfs create <nameofzpool>/<nameofdataset>
It is then possible to apply ZFS specific attributes to the dataset. For example, one could assign a quota limit to a specific directory within a dataset:
# zfs set quota=20G <nameofzpool>/<nameofdataset>/<directory>
To see all the commands available in ZFS, use :
$ man zfs
or:
$ man zpool
Scrub
ZFS pools should be scrubbed at least once a week. To scrub the pool:
# zpool scrub <pool>
To do automatic scrubbing once a week, set the following line in the root crontab:
# crontab -e
... 30 19 * * 5 zpool scrub <pool> ...
Replace <pool> with the name of the ZFS pool.
Check zfs pool status
To print a nice table with statistics about the ZFS pool, including and read/write errors, use
# zpool status -v
Destroy a storage pool
ZFS makes it easy to destroy a mounted storage pool, removing all metadata about the ZFS device. This command destroys any data contained in the pool:
# zpool destroy <pool>
And now when checking the status:
# zpool status
no pools available
To find the name of the pool, see #Check zfs pool status.
Export a storage pool
If a storage pool is to be used on another system, it will first need to be exported. It is also necessary to export a pool if it has been imported from the archiso as the hostid is different in the archiso as it is in the booted system. The zpool command will refuse to import any storage pools that have not been exported. It is possible to force the import with the -f argument, but this is considered bad form.
Any attempts made to import an un-exported storage pool will result in an error stating the storage pool is in use by another system. This error can be produced at boot time abruptly abandoning the system in the busybox console and requiring an archiso to do an emergency repair by either exporting the pool, or adding the zfs_force=1 to the kernel boot parameters (which is not ideal). See #On boot the zfs pool does not mount stating: "pool may be in use from other system"
To export a pool,
# zpool export bigdata
Rename a Zpool
Renaming a zpool that is already created is accomplished in 2 steps:
# zpool export oldname # zpool import oldname newname
Setting a Different Mount Point
The mount point for a given zpool can be moved at will with one command:
# zfs set mountpoint=/foo/bar poolname
Swap volume
ZFS does not allow to use swapfiles, but users can use a ZFS volume (ZVOL) as swap. It is importart to set the ZVOL block size to match the system page size, which can be obtained by the getconf PAGESIZE command (default on x86_64 is 4KiB). Another option useful for keeping the system running well in low-memory situations is not caching the ZVOL data.
Create a 8GiB zfs volume:
# zfs create -V 8G -b $(getconf PAGESIZE) \
-o primarycache=metadata \
-o com.sun:auto-snapshot=false <pool>/swap
Prepare it as swap partition:
# mkswap -f /dev/zvol/<pool>/swap # swapon /dev/zvol/<pool>/swap
To make it permanent, edit /etc/fstab. ZVOLs support discard, which can potentially help ZFS's block allocator and reduce fragmentation for all other datasets when/if swap is not full.
Add a line to /etc/fstab:
/dev/zvol/<pool>/swap none swap discard 0 0
Keep in mind the Hibernate hook must be loaded before filesystems, so using ZVOL as swap will not allow to use hibernate function. If you need hibernate, keep a partition for it.
Automatic snapshots
ZFS Automatic Snapshot Service for Linux
The zfs-auto-snapshot-gitAUR package from AUR provides a shell script to automate the management of snapshots, with each named by date and label (hourly, daily, etc), giving quick and convenient snapshotting of all ZFS datasets. The package also installs cron tasks for quarter-hourly, hourly, daily, weekly, and monthly snapshots. Optionally adjust the --keep parameter from the defaults depending on how far back the snapshots are to go (the monthly script by default keeps data for up to a year).
To prevent a dataset from being snapshotted at all, set com.sun:auto-snapshot=false on it. Likewise, set more fine-grained control as well by label, if, for example, no monthlies are to be kept on a snapshot, for example, set com.sun:auto-snapshot:monthly=false.
ZFS Snapshot Manager
The zfs-snap-managerAUR package from AUR provides a python service that takes daily snapshots from a configurable set of ZFS datasets and cleans them out in a "Grandfather-father-son" scheme. It can be configured to e.g. keep 7 daily, 5 weekly, 3 monthly and 2 yearly snapshots.
The package also supports configurable replication to other machines running ZFS by means of zfs send and zfs receive. If the destination machine runs this package as well, it could be configured to keep these replicated snapshots for a longer time. This allows a setup where a source machine has only a few daily snapshots locally stored, while on a remote storage server a much longer retention is available.
Troubleshooting
ZPool creation fails
If the following error occurs then it can be fixed.
# the kernel failed to rescan the partition table: 16 # cannot label 'sdc': try using parted(8) and then provide a specific slice: -1
One reason this can occur is because ZFS expects pool creation to take less than 1 second. This is a reasonable assumption under ordinary conditions, but in many situations it may take longer. Each drive will need to be cleared again before another attempt can be made.
# parted /dev/sda rm 1 # parted /dev/sda rm 1 # dd if=/dev/zero of=/dev/sdb bs=512 count=1 # zpool labelclear /dev/sda
A brute force creation can be attempted over and over again, and with some luck the ZPool creation will take less than 1 second. Once cause for creation slowdown can be slow burst read writes on a drive. By reading from the disk in parallell to ZPool creation, it may be possible to increase burst speeds.
# dd if=/dev/sda of=/dev/null
This can be done with multiple drives by saving the above command for each drive to a file on separate lines and running
# cat $FILE | parallel
Then run ZPool creation at the same time.
ZFS is using too much RAM
By default, ZFS caches file operations (ARC) using up to two-thirds of available system memory on the host. To adjust the ARC size, add the following to the Kernel parameters list:
zfs.zfs_arc_max=536870912 # (for 512MB)
For a more detailed description, as well as other configuration options, see gentoo-wiki:zfs#arc.
Does not contain an EFI label
The following error will occur when attempting to create a zfs filesystem,
/dev/disk/by-id/<id> does not contain an EFI label but it may contain partition
The way to overcome this is to use -f with the zfs create command.
No hostid found
An error that occurs at boot with the following lines appearing before initscript output:
ZFS: No hostid found on kernel command line or /etc/hostid.
This warning occurs because the ZFS module does not have access to the spl hosted. There are two solutions, for this. Either place the spl hostid in the kernel parameters in the boot loader. For example, adding spl.spl_hostid=0x00bab10c.
The other solution is to make sure that there is a hostid in /etc/hostid, and then regenerate the initramfs image. Which will copy the hostid into the initramfs image.
# mkinitcpio -p linux
On boot the zfs pool does not mount stating: "pool may be in use from other system"
Unexported pool
If the new installation does not boot because the zpool cannot be imported, chroot into the installation and properly export the zpool. See #Emergency chroot repair with archzfs.
Once inside the chroot environment, load the ZFS module and force import the zpool,
# zpool import -a -f
now export the pool:
# zpool export <pool>
To see the available pools, use,
# zpool status
It is necessary to export a pool because of the way ZFS uses the hostid to track the system the zpool was created on. The hostid is generated partly based on the network setup. During the installation in the archiso the network configuration could be different generating a different hostid than the one contained in the new installation. Once the zfs filesystem is exported and then re-imported in the new installation, the hostid is reset. See Re: Howto zpool import/export automatically? - msg#00227.
If ZFS complains about "pool may be in use" after every reboot, properly export pool as described above, and then rebuild ramdisk in normally booted system:
# mkinitcpio -p linux
Incorrect hostid
Double check that the pool is properly exported. Exporting the zpool clears the hostid marking the ownership. So during the first boot the zpool should mount correctly. If it does not there is some other problem.
Reboot again, if the zfs pool refuses to mount it means the hostid is not yet correctly set in the early boot phase and it confuses zfs. Manually tell zfs the correct number, once the hostid is coherent across the reboots the zpool will mount correctly.
Boot using zfs_force and write down the hostid. This one is just an example.
% hostid 0a0af0f8
This number have to be added to the kernel parameters as spl.spl_hostid=0x0a0af0f8. Another solution is writing the hostid inside the initram image, see the installation guide explanation about this.
Users can always ignore the check adding zfs_force=1 in the kernel parameters, but it is not advisable as a permanent solution.
Devices have different sector alignment
Once a drive has become faulted it should be replaced A.S.A.P. with an identical drive.
# zpool replace bigdata ata-ST3000DM001-9YN166_S1F0KDGY ata-ST3000DM001-1CH166_W1F478BD -f
but in this instance, the following error is produced:
cannot replace ata-ST3000DM001-9YN166_S1F0KDGY with ata-ST3000DM001-1CH166_W1F478BD: devices have different sector alignment
ZFS uses the ashift option to adjust for physical block size. When replacing the faulted disk, ZFS is attempting to use ashift=12, but the faulted disk is using a different ashift (probably ashift=9) and this causes the resulting error.
For Advanced Format Disks with 4KB blocksize, an ashift of 12 is recommended for best performance. See 1.10 What’s going on with performance? and ZFS and Advanced Format disks.
Use zdb to find the ashift of the zpool: zdb , then use the -o argument to set the ashift of the replacement drive:
# zpool replace bigdata ata-ST3000DM001-9YN166_S1F0KDGY ata-ST3000DM001-1CH166_W1F478BD -o ashift=9 -f
Check the zpool status for confirmation:
# zpool status -v
pool: bigdata
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scan: resilver in progress since Mon Jun 16 11:16:28 2014
10.3G scanned out of 5.90T at 81.7M/s, 20h59m to go
2.57G resilvered, 0.17% done
config:
NAME STATE READ WRITE CKSUM
bigdata DEGRADED 0 0 0
raidz1-0 DEGRADED 0 0 0
replacing-0 OFFLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0KDGY OFFLINE 0 0 0
ata-ST3000DM001-1CH166_W1F478BD ONLINE 0 0 0 (resilvering)
ata-ST3000DM001-9YN166_S1F0JKRR ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0KBP8 ONLINE 0 0 0
ata-ST3000DM001-9YN166_S1F0JTM1 ONLINE 0 0 0
errors: No known data errors
Tips and tricks
Embed the archzfs packages into an archiso
Follow the Archiso steps for creating a fully functional Arch Linux live CD/DVD/USB image.
Enable the archzfs repository:
~/archlive/pacman.conf
... [archzfs] Server = http://archzfs.com/$repo/x86_64
Add the archzfs-linux group to the list of packages to be installed (the archzfs repository provides packages for the x86_64 architecture only).
~/archlive/packages.x86_64
... archzfs-linux
Complete Build the ISO to finally build the iso.
Encryption in ZFS on linux
ZFS on linux does not support encryption directly, but zpools can be created in dm-crypt block devices. Since the zpool is created on the plain-text abstraction it is possible to have the data encrypted while having all the advantages of ZFS like deduplication, compression, and data robustness.
dm-crypt, possibly via LUKS, creates devices in /dev/mapper and their name is fixed. So you just need to change zpool create commands to
point to that names. The idea is configuring the system to create the /dev/mapper block devices and import the zpools from there.
Since zpools can be created in multiple devices (raid, mirroring, striping, ...), it is important all the devices are encrypted otherwise the protection
might be partially lost.
For example, an encrypted zpool can be created using plain dm-crypt (without LUKS) with:
# cryptsetup --hash=sha512 --cipher=twofish-xts-plain64 --offset=0 \
--key-file=/dev/sdZ --key-size=512 open --type=plain /dev/sdX enc
# zpool create zroot /dev/mapper/enc
In the case of a root filesystem pool, the mkinicpio.conf HOOKS line will enable the keyboard for the password, create the devices, and load the pools. It will contain something like:
HOOKS="... keyboard encrypt zfs ..."
Since the /dev/mapper/enc name is fixed no import errors will occur.
Creating encrypted zpools works fine. But if you need encrypted directories, for example to protect your users' homes, ZFS loses some functionality.
ZFS will see the encrypted data, not the plain-text abstraction, so compression and deduplication will not work. The reason is that encrypted data has always high entropy making compression ineffective and even from the same input you get different output (thanks to salting) making deduplication impossible. To reduce the unnecessary overhead it is possible to create a sub-filesystem for each encrypted directory and use eCryptfs on it.
For example to have an encrypted home: (the two passwords, encryption and login, must be the same)
# zfs create -o compression=off \
-o dedup=off \
-o mountpoint=/home/<username> \
<zpool>/<username>
# useradd -m <username>
# passwd <username>
# ecryptfs-migrate-home -u <username>
<log in user and complete the procedure with ecryptfs-unwrap-passphrase>
Emergency chroot repair with archzfs
To get into the ZFS filesystem from live system for maintenance, there are two options:
- Build custom archiso with ZFS as described in #Embed the archzfs packages into an archiso.
- Boot the latest official archiso and bring up the network. Then enable archzfs repository inside the live system as usual, sync the pacman package database and install the archzfs-archiso-linux package.
To start the recovery, load the ZFS kernel modules:
# modprobe zfs
Import the pool:
# zpool import -a -R /mnt
Mount the boot partitions (if any):
# mount /dev/sda2 /mnt/boot # mount /dev/sda1 /mnt/boot/efi
Chroot into the ZFS filesystem:
# arch-chroot /mnt /bin/bash
Check the kernel version:
# pacman -Qi linux # uname -r
uname will show the kernel version of the archiso. If they are different, run depmod (in the chroot) with the correct kernel version of the chroot installation:
# depmod -a 3.6.9-1-ARCH (version gathered from pacman -Qi linux but using the matching kernel modules directory name under the chroot's /lib/modules)
This will load the correct kernel modules for the kernel version installed in the chroot installation.
Regenerate the ramdisk:
# mkinitcpio -p linux
There should be no errors.
Bindmount
Here a bind mount from /mnt/zfspool to /srv/nfs4/music is created. The configuration ensures that the zfs pool is ready before the bind mount is created.
fstab
See systemd.mount for more information on how systemd converts fstab into mount unit files with systemd-fstab-generator.
/etc/fstab
/mnt/zfspool /srv/nfs4/music none bind,defaults,nofail,x-systemd.requires=zfs-mount.service 0 0
systemd mount unit
If it is not possible to bindmount a directory residing on zfs onto another directory using fstab, because the fstab is read before the zfs pool is ready, you can overcome this limitation with a systemd mount unit can be used for the bind mount. The name of the mount unit must be equal to the directory mentioned after "Where", replace slashes with minuses. See [2] and [3] for more details.
srv-nfs4-music.mount
[Mount] What=/mnt/zfspool Where=/srv/nfs4/music Type=none Options=bind [Unit] DefaultDependencies=no Conflicts=umount.target Before=local-fs.target umount.target After=zfs-mount.service Requires=zfs-mount.service ConditionPathIsDirectory=/mnt/zfspool [Install] WantedBy=local-fs.target
See also
- Installing Arch Linux on ZFS
- ZFS on Linux
- ZFS on Linux FAQ
- FreeBSD Handbook -- The Z File System
- Oracle Solaris ZFS Administration Guide
- Solaris Internals -- ZFS Troubleshooting Guide
- Pingdom details how it backs up 5TB of MySQL data every day with ZFS
- Tutorial on adding the modules to a custom kernel
- Aaron Toponce has authored a 17-part blog on ZFS which is an excellent read.
- VDEVs
- RAIDZ Levels
- The ZFS Intent Log
- The ARC
- Import/export zpools
- Scrub and Resilver
- Zpool Properties
- Zpool Best Practices
- Copy on Write
- Creating Filesystems
- Compression and Deduplication
- Snapshots and Clones
- Send/receive Filesystems
- ZVOLs
- iSCSI, NFS, and Samba
- Get/Set Properties
- ZFS Best Practices