lm_sensors (正體中文)

From ArchWiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tango-preferences-desktop-locale.png本條目或段落需要進行翻譯。Tango-preferences-desktop-locale.png

註記: 比英文版本落後 (討論)

本文描述了如何安裝、配置和使用lm_sensors來監控CPU以及主板和風扇的速度。

安裝lm_sensors

使用Pacman安裝軟件包 

# pacman -S lm_sensors

配置lm_sensors

使用sensors-detect檢測並生成内核模塊列表 

# sensors-detect

這將在/etc/sysconfig/lm_sensors裡創建配置

在/etc/rc.conf的DAEMONS列表裡加入sensors，令到啟動時自動加載内核模塊： 

DAEMONS=(syslog-ng crond ... sensors ...)

為了測試配置是否成功，現在就運行初始化腳本加載内核模塊 

# /etc/rc.d/sensors start

然後執行sensors命令 

$ sensors

你會看到像這樣的輸出顯式： 

lm85-i2c-0-2e
Adapter: SMBus I801 adapter at c800
V1.5:       +1.47 V  (min =  +0.00 V, max =  +3.32 V)
VCore:      +1.34 V  (min =  +0.00 V, max =  +2.99 V)
V3.3:       +3.32 V  (min =  +0.00 V, max =  +4.38 V)
V5:        +5.05 V  (min =  +0.00 V, max =  +6.64 V)
V12:      +11.94 V  (min =  +0.00 V, max = +15.94 V)
CPU_Fan:   1760 RPM  (min =    0 RPM)
fan2:         0 RPM  (min =    0 RPM)
fan3:         0 RPM  (min =    0 RPM)
fan4:         0 RPM  (min =    0 RPM)
CPU Temp:    +51°C  (low  =  -127°C, high =  +127°C)
Board Temp:
             +46°C  (low  =  -127°C, high =  +127°C)
Remote Temp:
             +45°C  (low  =  -127°C, high =  +127°C)
CPU_PWM:    77 
Fan2_PWM:   87 
Fan3_PWM:   87 
vid:      +1.088 V  (VRM Version 10.0)

使用lm_sensors

現在你應該可以使用lm_sensors的前端工具程序如gkrellm、xfce4-sensors-plugin、GNOME Computer Temperature Monitor以及ksensors。